TT Electronics’ GPCF surface mount resistors for general purpose use in precision and semi-precision applications are available in four compact sizes – 0402, 0603, 0805 and 1206 – and Ohmic values between 10 Ω and 100 kΩ.
Aimed at circuit designers who require devices with greater precision than thick film resistors, these nichrome chip resistors offer a better price/performance ratio than more costly high-performance thin film resistors. They are suitable for applications requiring moderate precision of 0,1% tolerance and 25 ppm/°C TCR, including instrumentation, power supplies, industrial controls and consumer medical equipment. Performance characteristics include a maximum operating temperature of +155°C.
The GPCF series is suitable for automated handling thanks to its rectangular shape and small dimensional tolerances. Electrical connection to a ceramic substrate or to a printed circuit board (PCB) is made by reflow or wave soldering of wrap-around terminations.
The wrap-around terminations not only ensure reliable contact, they provide good leach properties. Their robust construction means the resistors can be immersed in a solder bath for 30 seconds at 260°C, enabling them to be mounted on one side of a PCB while wire-leaded components are applied on the other side.
Compact high-current power inductor EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
Read more...Tiny noise suppression filters RS South Africa
Passive Components
TDK Corporation recently announced its latest noise suppression filters of the MAF0603GWY series, which measure only 0,6 x 0,3 x 0,3 mm.
Read more...Compact 1250 V choke solution Electrocomp
Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.
Read more...Tiny power inductor for low noise applications iCorp Technologies
Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
Read more...High-endurance polymer tantalum capacitors
Passive Components
Panasonic Industry TDC Series POSCAP polymer tantalum capacitors deliver high endurance and reliable performance in demanding, high-temperature environments.
Read more...Thin-film inductors for optical transceivers RS South Africa
Passive Components
TDK has expanded its PLEC69B series (1,2 x 0,6 x 0,95 mm – L x W x H) of thin-film inductors, used for separating the data signal from the power in optical transceivers in AI data centres.
Read more...Low-resistance MLCCs RS South Africa
Passive Components
TDK Corporation has expanded its CN series of low-resistance soft-termination multilayer ceramic capacitors; achieving 22 nF capacitance in the 3225 case size.
Read more...Ferrite cores with different shapes RS South Africa
Passive Components
TDK Corporation has introduced a variety of new large-size ferrite cores with different core shapes, making this the industry’s largest lineup of shapes, sizes, and materials for such large cores.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version