Opto-Electronics


Colour LEDs with oval radiation pattern

19 November 2014 Opto-Electronics

Osram Opto Semiconductors has launched an LED with oval light-radiating characteristics for large-screen video walls or digital road signs. Thanks to a compact housing measuring just 2,1 x 2,7 x 1,5 mm, almost twice as many Displix Oval LEDs can be mounted on a board than with ordinary radial diodes, doubling both the pixel density and the resolution of displays. As a result, the images displayed are extremely vivid, with high colour homogeneity.

An additional advantage of the high density is the fact that a lower pixel brightness is required, so that the individual LEDs take a lower current. In combination with the durable housing materials, this lower output extends the lifetime of the diodes.

The device has a black QFN (quad flat no leads) housing, which additionally boosts the image quality. It reduces reflections and increases the contrast and colour quality of the images displayed. Being surface mounted, it has very low tilt tolerances per diode. A display fitted with the new LEDs hence has a stable and very homogenous colour appearance when viewed from virtually any angle.

Both the processes and the processing of the Displix Oval are much simpler than with radial LEDs, greatly reducing customers’ further processing costs. Being very flat, it requires less silicone for the potting of the boards to protect the contacts from rain and moisture. This enables customers to reduce the amount of material used, which again has a considerable impact on their outlays.

The Displix Oval will be available from October 2014 in the colours yellow, red, green and blue.

For more information contact Ryan Hunt, Osram Opto Semiconductors, +27 (0)79 525 1779, [email protected], www.osram-os.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...
PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...
RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...