Opto-Electronics


Chip-on-board LEDs

4 February 2015 Opto-Electronics

New from Everlight Electronics are two chip-on-board (COB) LED families: the XUAN series of high-power devices and the Color Choice series CHI.

The 36 V XUAN series offers the dual benefit of high efficiency and easy assembly. Covering a wide wattage range from 2 to 50 W, the MCPCB device can achieve >130 lm/W. Designed with a highly thermally conductive mirror-aluminium substrate, it can be easily attached to a heatsink by holder or screws.

Another feature of the XUAN series is its wide driving operation range, ensuring very high efficacy in the typical driving state. In an over-driven state, however, it can still deliver a high lumen output and, with proper heatsink, also remains stable to bring about an economic lighting design. Seven different designs are currently available in 1313 and 1919 dimensions with colour temperature options from warm to cool (2700–6500 K) and CRI ratings of 82 (>80), 92 (>90) and >97 Ra. XUAN LEDs are a best fit for LED single light source applications like spotlights and downlights.

The Color Choice CHI COBs (9–29 W) are designed on a ceramic PCB package and based on two colour temperatures - 2700 K and 5700 K - which, when thoroughly mixed, can take on every ANSI colour temperature in this CCT range. All mixture points achieve >110 lm/W and a CRI in excess of 80.

The Color Choice series directly targets indoor retail, hospitality and residential lighting applications. Offered with wattages of 9 W, 19 W and 29 W, CHI LEDs can supplement direct luminaires and spotlights with dynamic colour temperature variability and allow the seamless setting of any desired colour temperature between 2700 K and 5700 K.

The CHI’s seamless colour temperature tunability is achieved by subdividing the COB into two electrically insulated segments for warm white 2700 K and cool white 5700 K, which can be controlled/driven independently from each other. Each circuit requires a separate power supply unit or a co-channel power supply. The COBs are suited for large spotlights in retail applications or smaller directional lamps like MR16, PAR20, PAR30, PAR38 lamps for general lighting use.

All chip-on-board LEDs from Everlight have completed LM80 lumen maintenance testing. A complete line of accessories such as standardised holders, appropriate reflectors and more are available.

For more information contact EBV Electrolink, +27 (0)21 402 1940, [email protected], www.ebv.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...
Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved