|
|
Automated optical cable certifier
4 February 2015, Test & Measurement
Newly released as part of EXFO’s OTDR-based iOLM software suite is iCERT, an accurate fibre certification tool meeting the latest industry standards (including TIA and ISO). iCERT is available for both single-mode and multimode fibre testing, and comes with a set of pre-defined test configurations providing quick access to the latest industry pass/fail thresholds to automatically certify cable installations in data centres and enterprise.
This solution greatly simplifies optical link assessment and troubleshooting while avoiding any risk of getting tampered results due to manual entering of the wrong pass/fail values or misinterpreting extensive, complex standards documents.
iOLM is an intelligent optical time domain reflectometer (OTDR)-based application that removes the need to set parameters and analyse multiple complex OTDR traces. It dynamically defines all test parameters and selects the optimum number of acquisitions required to deliver better accuracy.
The result is a clear assessment of any fibre with a detailed diagnosis on failed components, as well as a professional test report generated directly, with no need for post-processing. iOLM provides accurate insertion loss, optical return loss and fibre length measurements, at the touch of a single button. Additionally, it will clearly identify faults and potential problems that can be fixed right away. For more information contact Chris Nel, Lambda Test Equipment, +27 (0)12 349 1341, chris@lambdatest.co.za, www.lambdatest.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Body-worn EMF monitor
29 May 2019, Accutronics, Test & Measurement
For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...
- Optical spectrum analyser
29 May 2019, Coral-i Solutions , Test & Measurement
Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
- New scan capabilities for EMI receiver
29 May 2019, Concilium Technologies, Test & Measurement
Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
- Passive intermodulation analyser
30 April 2019, Actum Electronics, Test & Measurement
Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number ...
- Vacuum test fixture
30 April 2019, Electronic Industry Supplies, Test & Measurement
With its newly designed vacuum test fixtures, Ingun has simplified mass testing of a small number of PCB (printed circuit board) versions. The vacuum test fixture combines intuitive handling and a robust, ...
- Optical spectrum analyser
30 April 2019, Coral-i Solutions , Test & Measurement
Anritsu announced the sales launch of the new MS9740B spectrum analyser which has been developed for evaluating the output characteristics of optical active devices used by optical communications systems. ...
- New scan capabilities for EMI receiver
30 April 2019, Concilium Technologies, Test & Measurement
Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics ...
- Body-worn EMF monitor
30 April 2019, Accutronics, Test & Measurement
For those working with high-intensity electromagnetic fields (EMF), such as in the near field region of radar antennas, broadcast transmitters or cellular base stations, it is vital to wear personal safety ...
- Passive intermodulation analyser
27 March 2019, Actum Electronics, Test & Measurement
Passive intermodulation (PIM) is one of the main causes of faults in modern networks. PIM can significantly reduce the network quality with regard to range and data transmission. PIM is caused by a number ...
- Arbitrary waveform generator
27 March 2019, Vepac Electronics, Test & Measurement
Tektronix launched the AWG70000B arbitrary waveform generator with new features that enable it to fully support the testing of complex electronic warfare and wireless communications systems that require ...
- Battery optimisation software for IoT devices
27 February 2019, Concilium Technologies, Power Electronics / Power Management, Test & Measurement
Keysight Technologies has introduced the X8712A IoT device battery life optimisation software solution, to ensure optimal battery life prior to device deployment to accelerate troubleshooting and device ...
- Calibration and the challenges of choice
27 February 2019, Concilium Technologies, Test & Measurement
A poor or incomplete calibration can lead to significant errors in your measurements. The time to develop a product may exceed your original schedules and production yields may be too low if the test ...
|
|
