mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Test probes with high pre-loaded spring force
23 September 2015, Test & Measurement

To ensure reliable contacting of printed circuit boards which are contamin-ated with residues and/or oxidised from the soldering process, a wide range of ICT test probes is available from PTR.

These series for 50, 75 and 100 mil spacing are available with different aggressive tip styles, and a variety of possible contact pressures to a maximum of 5 N meets the most demanding requirements.

The product range has been amended with new HPL (high pre-loaded) test probes which offer better penetration of contaminants and enable better signal transfer even in lead-free applications. They do not increase stresses on the unit under test or the test fixture, and the same probe travel is maintained as with the standard series.

Despite the lack of solder on the test points, the new test probes provide secure contacting and satisfy all the test requirements for lead-free boards.


Credit(s)
Supplied By: Wiltron Agencies
Tel: +27 12 940 9475
Fax: 086 684 7506
Email: wiltron@global.co.za
www: www.wiltron-agencies.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Handheld PoE tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched a new handheld tester that eliminates guesswork when installing, maintaining and troubleshooting PoE devices and data cabling. PoE Pro measures and reports PoE class, voltage/voltage ...
  • Debugging probe for STM32 MCUs
    31 July 2019, Altron Arrow, Test & Measurement
    The STLINK-V3MINI probe, new from STMicroelectronics, combines the features of the STLINK-V3SET with standalone simplicity for faster programming and ease of use. The compact, portable probe can be ...
  • Digitiser for advanced applications
    31 July 2019, Comtest, Test & Measurement
    Tektronix, Inc. has unveiled the 6 Series low-profile digitiser, a 4-channel instrument offering up to 8 GHz bandwidth, 25 GSps sampling rate and a 12-bit ADC (analog-to-digital converter) on every channel, ...
  • Cost-effective tools for makers and small businesses to innovate
    31 July 2019, TRX Electronics, Test & Measurement
    In addition to professional engineers, makers and hobbyists are now able to contribute significantly to innovation in our modern world – as they can develop ideas with passion and without the financial and logistical constraints that often stifle ideas in large corporations.
  • Sniffer software gets J-Link RTT terminal plugin
    31 July 2019, RF Design, Test & Measurement
    Despite being fans of the Real-Time Trace (RTT) feature in Segger’s J-Link debug probes, engineers at Tibbo found that Segger’s own RTT Viewer software was a bit too simple for their needs, and so created ...
  • EXFO launches new category of fibre testing solutions
    26 June 2019, Lambda Test, Test & Measurement
    EXFO has launched what it describes as the first optical fibre multimeter (OFM). Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
  • Handheld industrial Ethernet tester
    26 June 2019, Coral-i Solutions , Test & Measurement
    Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
  • PCB cleaning diagnostic system
    26 June 2019, Electronic Industry Supplies, Test & Measurement
    The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards. The system can be used by electronics ...
  • Pin strips for KNX applications
    26 June 2019, Wiltron Agencies, Interconnection
    The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
  • 2-channel digital storage oscilloscope
    26 June 2019, Vepac Electronics, Test & Measurement
    The Model 1335 is PeakTech’s latest-generation 2-channel digital storage oscilloscope (DSO) for the education and professional sector. With its attractive price-performance ratio, modern technology and ...
  • New MDO and MSO from Tektronix
    26 June 2019, Comtest, Test & Measurement
    Tektronix has grown its portfolio with the launch of the 3-Series mixed domain oscilloscope (MDO) and 4-Series mixed-signal oscilloscope (MSO) delivering the most powerful, versatile and easy-to-use oscilloscopes ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.