Cypress Semiconductor announced a new family of energy harvesting power management integrated circuits (PMICs) that enable tiny, solar-powered wireless sensors for Internet of Things (IoT) applications.
The new devices are the world's lowest-power, single-chip energy harvesting PMICs, and can be used with solar cells as small as 1 cm². The fully integrated chips are ideal for batteryless wireless sensor nodes (WSN) that monitor physical and environmental conditions for smart homes, commercial buildings, factories, infrastructure and agriculture.
Cypress offers a complete, battery-free energy harvesting solution that pairs the S6AE101A PMIC, the first device in the new family, with the EZ-BLE PRoC module for Bluetooth Low Energy connectivity, along with supporting software. Pictured is a demonstration of a tiny 1 cm by 1 cm solar-powered WSN employing the S6AE101A.
The WSN IoT device market is expected to grow to more than 5 billion units by 2020, putting a premium on battery-free implementations to reduce cost and maintenance problems. The placement of a node may limit its size and the amount of light available, thereby limiting the size and power output of the solar module and the start-up power available for the energy harvesting PMIC.
The new Cypress Energy Harvesting PMIC devices address these challenges with startup power of 1,2 μW and consumption current as low as 250 nA, maximising the power available for the sensing, processing and communications functions of a target application. The fully certified, small form-factor EZ-BLE PRoC module, which is based on Cypress's PRoC BLE Programmable Radio-on-Chip solution, works with the PMIC devices to contribute to the low power and ease-of-use of an energy harvesting system solution.
Online sensor technology hub
Analogue, Mixed Signal, LSI
Mouser’s sensor content hub offers an extensive collection of articles, blogs, eBooks, and product information from its technical experts and leading manufacturing partners.
Read more...Ultra-low power MEMS accelerometer Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.
Read more...Versatile range of camera modules EBV Electrolink
Opto-Electronics
The CAM-66GY pro-modules from ST are a full range of sample camera modules made for a seamless evaluation and integration of the VD66GY 1,5-megapixel colour image sensor.
Read more...BT Audio 4 Click board Dizzy Enterprises
Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.
Read more...Precision MEMS IMU modules Altron Arrow
Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.
Read more...Elevate your motor control designs EBV Electrolink
DSP, Micros & Memory
Built on an Arm Cortex-M33 core running up to 180 MHz, the MCX A34 family combines high-performance math acceleration and advanced motor control subsystems to unlock efficient motor drive solutions.
Read more...MEMS with embedded AI processing Altron Arrow
Analogue, Mixed Signal, LSI
STMicroelectronics has announced an inertial measurement unit that combines sensors tuned for activity tracking and high-g impact measurement into a single, space-saving package.
Read more...High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...MCU for noisy environments EBV Electrolink
DSP, Micros & Memory
The MCX?E24X is a high-performance microcontroller family from NXP, engineered for industrial, automotive-like, and energy-focused environments.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version