Calex announced the introduction of the FXP series of DC-DC converters featuring a wide 9 to 36 V input range. Up to three full bricks can be set up in parallel with no external circuitry required for output power of up to 2,8 kW. Current sharing among the converters is achieved using the droop method, therefore no current share pin is required.
The output voltages of the devices are 24 and 28 V, input to output isolation is 2250 V d.c. and efficiency is as high as 96,5%. The 24 V model provides up to 42 A of output current and the 28 V model provides up to 36 A; both models will operate down to a no-load condition. The output noise of the 24 V model is 240 mV peak to peak and the 28 V model is 280 V peak to peak. Line regulation is 0,05% typ and load regulation is 0,56 V for the 24 Vout model and 0,65 V for the 28 V model.
Backed by a five-year warranty, the FXP series feature a mean time before failure of 5,4 million hours. Both models are protected by over-current shutdown, short circuit protection and over-temperature protection. The case operating temperature range is -40°C to 100°C but an extended temperature range version of the product (-T variant) has a case operating temperature of -55°C to 105°C including cold start at -55°C.
The converters measure 63,5 x 119,38 x 13,21 mm and are designed to meet UL/cUL 60950, IEC/EN 60950-1 and MIL-STD-810G for functional shock and vibration. Output voltage setpoint accuracy is ±0,25% and temperature coefficient is 0,015%/°C. Both models feature ON/OFF control - the OFF state idle current is 3 mA, making them ideal for battery powered applications.
NVDC power-path control to 1– 6 cell battery systems iCorp Technologies
Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.
Read more...Precise, adaptive battery health-monitoring RS South Africa
Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.
Read more...Compact 6 A automotive buck converter Altron Arrow
Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.
Read more...The new role of UPS technology in high-precision automation Omron Electronics
Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.
Read more...Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version