15 June 2016Enclosures, Racks, Cabinets & Panel Products
Smaller MicroTCA systems are used primarily for digital video and image processing, in automation and machine control systems and electronic signal processing. Applications in these areas often require just one or two AdvancedMC modules, but high data rates over the backplane are still necessary.
That’s why Pentair has developed a new 2-slot Schroff MicroTCA system. The ‘embedded MCH’ (eMCH) used in this system allows for communication between the AdvancedMC modules and the system monitoring, including power and cooling management, thus ensuring a high level of reliability. In addition, the 1 GbE switch connected to the 1 GbE uplink on the case front of the eMCH enables the system components to be linked directly into an existing network infrastructure.
The system is designed to accommodate one and two MicroTCA modules: either one and two single full-size modules or one and two mid-size modules can be inserted into the EMC-shielded unit. Using a small form-factor integrated eMCH instead of a double-size pluggable MCH module reduces the overall dimensions of the system to a very compact 260 mm width, 43 mm height and 302 mm depth.
The cooling unit, consisting of four fans and air filters, is installed to the right of the modules. Cold air is drawn in from the right and guided left through the system. An additional fan is located in the rear on the left next to the backplane, ensuring a cooling capacity of 150 W at an ambient temperature of +55°C. An open-frame PSU matched to the system with a capacity of 150 W ensures consistent power supply. All ports are linked on the MicroTCA backplane for large data transfer between modules.
Simple construction of the system makes it very service-friendly, as individual components are easy to replace or maintain. The top cover is removed by undoing a few screws, allowing the fan unit and air filter to be easily replaced. Small indentations in the base and top plates allow rubber feet (included) to be attached. This feature allows for stacking of multiple systems. Systems can also be equipped with 19” brackets and fitted into a cabinet.
Read more...Transporting and storing lithium-ion batteries
Enclosures, Racks, Cabinets & Panel Products
Lithium-ion batteries have become ubiquitous in modern life, but along with their benefits comes a serious challenge: these batteries pose fire and safety risks and are classified as dangerous goods for transport.
Read more...Non-contact safety door switch Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, designed to enhance workplace safety and streamline machinery operations.
Read more...Easy installation panel mount assembly Future Electronics
Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.
Read more...RF shield box to 12 GHz Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.
Read more...Film and mica capacitors Actum
Passive Components
By utilising various polymer dielectrics plastics, Exxelia film and mica capacitors meet most technical requirements and serve all functions from standard filtering to specialised applications.
Read more...High visibility 4-digit panel ammeters Electrocomp Express
Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version