Interconnection


Connection modules for network cable repairs

15 November 2017 Interconnection

Network cables can get damaged and often need to be extended. The problem is that commonly damaged cables have to be replaced or repaired temporarily, only to be permanently fixed at a scheduled, convenient time to ensure conformance to specification. Telegärtner’s VM-Pro 8-8 connection module is an ideal solution as it enables immediate conformance, saving time and money.

The VM-Pro 8-8 is simple to install, requires no special tools and offers transmission properties up to Class FA according to the ISO/IEC 11801 standard. It is suitable for both shielded and unshielded cables with solid or stranded conductors ranging from AWG27 to AWG22 in size and it also accommodates cables with outer diameters of 5,5 mm up to 9,0 mm. Due to its compact shape, the connection module is perfect for use in confined spaces.

Moreover, the VM-Pro 8-8 provides IP67 protection through the use of compression glands, which aid with mechanical stability and enable reliable strain relief. It is rated Category 7A (1 GHz) and its small size, robust design, and IP67 rating means the repair can be a permanent one rather than a temporary fix, thereby saving on total installation cost.

Other products in the range include the VM 8-8 Cat.7A single, PCB mounted module that can be wall mounted, or, if required, on a DIN rail by using a rail adaptor; as well as the Multi 12x VM 8-8 Cat.7A 19” rack-mountable module, which accommodates up to 12 cables; and the Multi 6x VM 8-8 Cat.7A wall-mountable modules for up to six cables.

For more information contact Cornelius Bredenhann, Webb Industries, +27 (0)11 719 0000, [email protected], www.webb.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Blade terminals deliver greater power density
Spectrum Concepts Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.

Read more...
What’s the big deal with open pin fields?
Spectrum Concepts Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.

Read more...
New connector for Push-X technology
Phoenix Contact Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.

Read more...
Test cable designed for maximum ruggedness
Conical Technologies Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.

Read more...
Safe connection under load
Phoenix Contact Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.

Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.

Read more...
Connectors for energy storage systems
Phoenix Contact Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.

Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
mBend cable assemblies
Conical Technologies Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved