|
|
250 V EMC filters
14 November 2018, Circuit & System Protection
TDK announced the introduction of the TDK-Lambda RSEV series of EMC filters, with a voltage of 250 V a.c./d.c. and a choice of 6, 10, 16, 20 and 30 A currents ratings. The RSEV has an integrated touch-resistant terminal block with recessed, captive screws. Hardware cannot be misplaced or dropped inside the system enclosure. The filters are suitable for general-purpose use in a wide range of industrial and communications equipment.
The RSEV series is chassis mountable, or with an optional kit can be attached to industry standard DIN rails. The maximum weight is 150 g for the 30 A model. All models share a common package size of 85 x 39 x 30 mm (L x W x H), a 37% reduction in size compared to previous models (RSEN 30 A). The filters have an operating ambient temperature rating of -25°C to +85°C with derating above 55°C.
The series has a maximum earth leakage current of 1 mA at 250 V a.c. 60 Hz, and is safety certified to the UL 1283, CSA C22.2 No.8 and EN 60939-3 standards with compliancy to the RoHS2 directive. A five-year warranty is standard. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- EMI compliance testing vs. pre-compliance testing
25 September 2019, Concilium Technologies, Circuit & System Protection
Electromagnetic interference (EMI) is caused by unintentional emissions from electronic equipment. Compared to natural sources of EMI, such as lightning and solar storms, engineers are more concerned ...
- Conductive rubber gaskets
25 September 2019, Conical Technologies, Circuit & System Protection
A range of conductive O-profile silicone rubber gaskets is available from Holland Shielding Systems, developed for high-performance shielding up to 18 GHz and used where environmental and EMI screening ...
- High-temperature TVS MLVs
25 September 2019, Future Electronics, Circuit & System Protection
The new TransGuard VT Series multilayer varistors (MLV) made by AVX are rated for transient voltage suppression (TVS) applications operating at very high temperatures. They provide reliable, bidirectional ...
- Test unit controls access to ESD protected areas
25 September 2019, Altico Static Control Solutions, Circuit & System Protection
In the electronics manufacturing industry, an electrostatic discharge (ESD) can cause irreparable damage to electronic components. This micro-lightning bolt can burn holes through insulating layers and ...
- High-voltage rack-mount PSUs
25 September 2019, Vepac Electronics, Power Electronics / Power Management
XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature ...
- 4-channel PC-based oscilloscope
28 August 2019, Vepac Electronics, Test & Measurement
The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
- Digital fibre-optic sensor
28 August 2019, Vepac Electronics, Opto-Electronics
The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides.
The slim-line housing with protective lid will fit in a variety ...
- All-in-one light pipe system
28 August 2019, Vepac Electronics, Opto-Electronics
Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed.
The all-in-one adaptor system is built with optimum ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- SMT test points and terminal pins
31 July 2019, Vepac Electronics, Interconnection
Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
|
|
