|
|
Rugged spectrum analyser for outdoor use
14 November 2018, Test & Measurement
The Spectran HF-XFR Pro from Aaronia has been specifically designed for use in harsh conditions such as for military use, aerospace, mining, construction, research and development - even in pouring rain, extreme temperatures and extremely dusty and dirty environments. It has been independently tested in accordance with MIL -STD- 810G, IP65 and MIL -STD- 461F standards.
The instrument provides a powerful, impact resistant outdoor notebook as well as a high-end spectrum analyser in one compact device. Based on a novel and patented method of spectrum analysis, the locating of interference sources and their causes, determination of frequency and signal strength measurement, and evaluation conform to the most complex limits.
A variety of trigger functions is offered, in addition to an unlimited number of limits (e.g. EN55011, EN55022, ICNIR), including limit lines and beam indicator as well as a special limit editor to create and save custom limits. The spectrum analyser has an Intel i7 processor with 8 GB RAM, full HD multi- touch screen, integrated GPS and ultra-low noise level of 170 dBm to (1 Hz) DANL.
Powerful software turns the XFR into a multi-functional solution for RF measurements of all kinds. The software solution also includes a recording and playback function, simultaneous display of multiple spectra, histogram function, waterfall display, unlimited number of markers, complex limit indicator, and more.
The instrument comes with an omnidirectional antenna (700 MHz–2,5 GHz) and a loop antenna (680 MHz–10 GHz), in addition to many optional antennas for pre-compliance and EMC testing. The latter offer a higher frequency range (up to 18 GHz).
For more information contact Vepac Electronics, +27 11 454 8053, sales@vepac.co.za, www.vepac.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- 4-channel PC-based oscilloscope
28 August 2019, Vepac Electronics, Test & Measurement
The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
- Digital fibre-optic sensor
28 August 2019, Vepac Electronics, Opto-Electronics
The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides.
The slim-line housing with protective lid will fit in a variety ...
- All-in-one light pipe system
28 August 2019, Vepac Electronics, Opto-Electronics
Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed.
The all-in-one adaptor system is built with optimum ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- SMT test points and terminal pins
31 July 2019, Vepac Electronics, Interconnection
Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
- Handheld PoE tester
26 June 2019, Coral-i Solutions , Test & Measurement
Ideal Networks has launched a new handheld tester that eliminates guesswork when installing, maintaining and troubleshooting PoE devices and data cabling. PoE Pro measures and reports PoE class, voltage/voltage ...
- Digitally controlled power supply
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power’s nanofleX series of configurable, modular, digitally controlled AC-DC power supplies is constructed in a compact, low-profile 1U mechanical chassis format that suits today’s space constrained ...
- Conformal coatings for challenging operating environments
31 July 2019, Vepac Electronics, Manufacturing / Production Technology, Hardware & Services
Modern electronic assemblies are increasingly expected to survive hostile operating environments and work reliably in conditions of prolonged high temperatures in the presence of thermal shock and high ...
|
|
