|
|
|
Digital PFC and LLC resonant controller
14 November 2018, Power Electronics / Power Management
Monolithic Power Systems’ HR1200 is a high-performance controller that integrates an advanced digital PFC (power factor correction) controller and a half-bridge LLC resonant controller. It requires fairly low input power at no load or ultra-light load, making it compliant with certain Energy using Product directive (EuP) specifications.
The PFC of the HR1200 employs a patented average current control scheme, which can operate both in continuous conduction mode (CCM) and discontinuous conduction mode (DCM) according to the instantaneous condition of the input voltage and output load. The IC exhibits high efficiency and high power factor at light load.
In CCM, the HR1200 can be used in applications up to 500 W with minimal board size limitations. The performance of the PFC can be optimised by programming multiple parameters through an I²C GUI. Programming can be completed either by the factory or by the customer referring to a detailed user guide.
The half-bridge LLC resonant converter achieves high efficiency with zero-voltage switching (ZVS). The HR1200 implements an adaptive dead-time adjustment (ADTA) function to guarantee ZVS in different load conditions. Additionally, it can prevent the LLC converter from operating in capacitive mode, making it more robust and easier to design.
The chip integrates a high-voltage (HV) current source internally for start-up. When the AC input is removed, the HV current source also functions as an X-cap discharger. Such features are helpful to reduce related devices, thus reducing power consumption at no load.
The HR1200 has multiple protection features including thermal shutdown (TSD), open-loop protection (OLP), over-current protection (OCP), over-voltage protection (OVP) and brown-in/brown-out protection.
For more information contact NuVision Electronics, +27 11 608 0144, gdeklerk@nuvisionelec.co.za, www.nuvisionelec.com |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Wireless charging set to pull the plug on wired technology
30 January 2019, TRX Electronics, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT, Power Electronics / Power Management
The technology will fully deliver on its promise when people can go about their everyday lives without ever worrying about carrying cables or power banks along with them.
- DIN rail power supply
30 January 2019, Accutronics, Power Electronics / Power Management
Accutronics announced that it has been formally appointed as the exclusive representative of TDK-Lambda and its entire range of products for the South African territory. Together with this announcement, ...
- 600 V GaN HEMTs
30 January 2019, Altron Arrow, Power Electronics / Power Management
Gallium nitride (GaN) offers fundamental advantages over silicon. In particular, the higher critical electrical field makes it very attractive for power semiconductor devices, with outstanding specific ...
- Ultra slim DIN-rail PSUs
30 January 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced the DSR range of AC-DC DIN-rail power supplies approved for industrial control systems and information technology equipment applications. These versatile supplies provide reliable ...
- Constant-current LED drivers
30 January 2019, Altron Arrow, Opto-Electronics, Power Electronics / Power Management
Infineon Technologies’ LITIX Basic+ LED drivers serve as an extension to the existing LITIX Basic family.
The new linear constant current sources, with their 1 to 3 inputs/outputs, build a scalable ...
- Multiple-output PMICs
30 January 2019, CST Electronics, Power Electronics / Power Management
The MAX17270, MAX77278, MAX77640/MAX77641 and MAX77680/MAX77681 power-management integrated circuits (PMICs) from Maxim Integrated Products help to reduce the power management footprint for space-constrained ...
- Buck-boost converters with I²C interface
30 January 2019, NuVision Electronics, Power Electronics / Power Management
The MP8860 from Monolithic Power Systems is a synchronous 4-switch integrated buck-boost converter, which is capable of regulating the output voltage from 2,8 V to 22 V input voltage range with high efficiency. ...
- PMIC for optical measurements
30 January 2019, CST Electronics, Power Electronics / Power Management
The ultra-low-power MAX20345 from Maxim Integrated Products provides a way for designers of always-on wearable and Internet of Things (IoT) devices to extend battery runtime while shrinking form factor. ...
- Wi-Fi modules and transceivers
30 January 2019, NuVision Electronics, Telecoms, Datacoms, Wireless, IoT
Silicon Labs has expanded its Wi-Fi portfolio of modules and transceivers. Designed for the specific needs of IoT applications, the Wireless Gecko portfolio boasts low power consumption for power-sensitive ...
- 1800 W electronic load
14 November 2018, Conical Technologies, Test & Measurement, Power Electronics / Power Management
Itech announced the release of the latest addition to its electronic load range, the IT8615. This e-Load has a compact height of only 3U for an 1800 Watt load, with an AC frequency adjustable from 45 ...
- Bluetooth and Wi-Fi with zero programming
14 November 2018, NuVision Electronics, Telecoms, Datacoms, Wireless, IoT
Silicon Labs is offering a new Wireless Xpress solution to help developers get IoT applications connected and running in a day, with no software development necessary. The solution provides a configuration-based ...
- Programmable DC power supplies
14 November 2018, Accutronics, Power Electronics / Power Management
TDK announced the addition of high-power GSP models to the TDK Lambda GENESYS+ series of programmable DC power supplies. This expansion now provides 2U high, 10 kW and 3U high, 15 kW versions with output ...
|
|
