mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Adhesive label sensor
EMP 2019 Electronics Manufacturing & Production Handbook, Manufacturing / Production Technology, Hardware & Services

The Label-Eye from Tri-Tronics is a special-purpose gap or slot sensor optimised to sense adhesive labels adhering to a roll of backing paper. The web of labels is directed from a roll across a peeler plate or around a sharp edge. As the web passes around the sharp edge of the peeler plate, the adhesive label peels from the backing material.

The function of the Label-Eye is to look through the backing paper to detect the gap between the labels and signal the labelling machine to stop the dispensing mechanism before the label is completely dislodged from the backing material. With the next ‘up’ label protruding off the end of the peeler plate, it is now perfectly positioned to be applied to the next product as it passes by on a conveyor.

Setup is accomplished by the single push of a button, and the device supports both opaque and translucent labels.


Credit(s)
Supplied By: Vepac Electronics
Tel: +27 11 454 8053
Fax: +27 11 608 1661
Email: sales@vepac.co.za
www: www.vepac.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • High-voltage rack-mount PSUs
    25 September 2019, Vepac Electronics, Power Electronics / Power Management
    XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Digital fibre-optic sensor
    28 August 2019, Vepac Electronics, Opto-Electronics
    The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...
  • All-in-one light pipe system
    28 August 2019, Vepac Electronics, Opto-Electronics
    Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...
  • Hybrid surface mounters
    28 August 2019, Zetech, Manufacturing / Production Technology, Hardware & Services
    Yamaha’s S10 and S20 i-Pulse 3D hybrid surface mounters, featuring enhanced support for MIDs (moulded interconnect devices), were developed under the concept of a single-unit manufacturing centre designed ...
  • Dual-syringe dispenser
    28 August 2019, Test & Rework Solutions, Manufacturing / Production Technology, Hardware & Services
    Techcon announced the release of its new 50 ml dual-syringe dispenser designed for hassle-free dispensing of 50 ml dual syringes. The system can accommodate conveniently packaged 50 ml side-by-side ...
  • Bidirectional laboratory power supply
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
  • DC-DC converter for DIN-rail mounting
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
  • Rugged DC-DC converters
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
  • SMT test points and terminal pins
    31 July 2019, Vepac Electronics, Interconnection
    Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
  • DC UPS for DIN-rail mounting
    31 July 2019, Vepac Electronics, Power Electronics / Power Management
    The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
  • The only constant is change
    31 July 2019, Microtronix Manufacturing, Manufacturing / Production Technology, Hardware & Services
    Blatant tender rigging and wholesale corruption poses one of the biggest threats to us achieving arguably the single most important and critical requirement in the revival and rejuvenation of our country’s prospects through job creation.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.