mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Thermal phase change material
EMP 2019 Electronics Manufacturing & Production Handbook, Manufacturing / Production Technology, Hardware & Services

Included in Electrolube’s thermal management product portfolio are TPM350 and TPM550 thermally conductive phase change materials.

TPM350 has a thermal conductivity of 3,5 W/m.K and becomes workable at approximately 50°C. At this ‘activation’ temperature it changes state to become a lower viscosity material, minimising contact thermal resistance and improving thermal conductivity. Once it cools, it reverts back to its original state. The material’s advanced formulation ensures minimal contact thermal resistance.

TPM550 has a higher thermal conductivity of 5,5 W/m.K and an activation temperature of 45°C. In common with the TPM350 product, TPM550 produces no mess due to its thixotropic characteristics which prevent flow outside of defined interfaces. Both TPM350 and TPM550 can be reworked and their low specific gravity means that more applications can be served per kilogram of the materials, reducing production costs.

The new phase change materials are silicone-free, have an operating temperature range of -40°C to +125°C and are RoHS-2 compliant.


Credit(s)
Supplied By: Vepac Electronics
Tel: +27 11 454 8053
Fax: +27 11 608 1661
Email: sales@vepac.co.za
www: www.vepac.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Rugged DC-DC converters
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Digital fibre-optic sensor
    28 August 2019, Vepac Electronics, Opto-Electronics
    The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...
  • All-in-one light pipe system
    28 August 2019, Vepac Electronics, Opto-Electronics
    Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...
  • Hybrid surface mounters
    28 August 2019, Zetech, Manufacturing / Production Technology, Hardware & Services
    Yamaha’s S10 and S20 i-Pulse 3D hybrid surface mounters, featuring enhanced support for MIDs (moulded interconnect devices), were developed under the concept of a single-unit manufacturing centre designed ...
  • Dual-syringe dispenser
    28 August 2019, Test & Rework Solutions, Manufacturing / Production Technology, Hardware & Services
    Techcon announced the release of its new 50 ml dual-syringe dispenser designed for hassle-free dispensing of 50 ml dual syringes. The system can accommodate conveniently packaged 50 ml side-by-side ...
  • Bidirectional laboratory power supply
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
  • DC-DC converter for DIN-rail mounting
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
  • SMT test points and terminal pins
    31 July 2019, Vepac Electronics, Interconnection
    Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
  • DC UPS for DIN-rail mounting
    31 July 2019, Vepac Electronics, Power Electronics / Power Management
    The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
  • The only constant is change
    31 July 2019, Microtronix Manufacturing, Manufacturing / Production Technology, Hardware & Services
    Blatant tender rigging and wholesale corruption poses one of the biggest threats to us achieving arguably the single most important and critical requirement in the revival and rejuvenation of our country’s prospects through job creation.
  • All in space is not rocket science
    31 July 2019, Elmatica, Manufacturing / Production Technology, Hardware & Services
    Elmatica, a Norwegian printed circuit board (PCB) broker that established an office in South Africa last year, has assisted a newcomer to the space satellite scene to put its satellites into space.

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.