mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Constant-current LED drivers
30 January 2019, Opto-Electronics, Power Electronics / Power Management

Infineon Technologies’ LITIX Basic+ LED drivers serve as an extension to the existing LITIX Basic family.

The new linear constant current sources, with their 1 to 3 inputs/outputs, build a scalable family to reduce system costs through the need for fewer external components and the introduction of a power shift feature.

Output currents from 5 mA up to 360 mA (with power shift) can be served with this driver family, which also has optimised diagnosis features as well as improved output current accuracy. Several selectable fault management modes offer high design-in flexibility.

The devices’ flexible Single LED Short (SLS) feature puts them into either a latched off-state, active retry or simply diagnosis without channel deactivation. Design flexibility is provided through footprint compatibility across the entire family.

For more information contact Dirk Venter, Altron Arrow, +27 11 923 9600, dventer@arrow.altech.co.za, www.arrow.altech.co.za


Credit(s)
Supplied By: Altron Arrow
Tel: +27 11 923 9600
Fax: +27 11 923 9884
Email: info@arrow.altech.co.za
www: www.altronarrow.com
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Wireless charging set to pull the plug on wired technology
    30 January 2019, TRX Electronics, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT, Power Electronics / Power Management
    The technology will fully deliver on its promise when people can go about their everyday lives without ever worrying about carrying cables or power banks along with them.
  • Overcoming the challenges of implementing IIoT technology
    30 January 2019, Altron Arrow, This Week's Editor's Pick, Telecoms, Datacoms, Wireless, IoT
    The fundamental technologies that will form the basis of IIoT implementations are connectivity, sensors and actuators.
  • RISC-V based FPGA architecture
    30 January 2019, Altron Arrow, Programmable Logic
    Microchip, via its Microsemi Corporation subsidiary, announced an extension to its Mi-V ecosystem by unveiling the architecture for a new class of SoC FPGAs at the RISC-V Summit during December 2018. ...
  • Arduino shield for energy measurement
    30 January 2019, Altron Arrow, Computer/Embedded Technology
    Analog Devices’ EV-ADE9153ASHIELDZ is an Arduino shield compatible with Arduino Uno, Arduino Zero, or ESP8266. The shield has an on-board shunt resistor for line current measurement and enables quick ...
  • 600 V GaN HEMTs
    30 January 2019, Altron Arrow, Power Electronics / Power Management
    Gallium nitride (GaN) offers fundamental advantages over silicon. In particular, the higher critical electrical field makes it very attractive for power semiconductor devices, with outstanding specific ...
  • 90 CRI LEDs with high efficacy
    30 January 2019, Altron Arrow, Opto-Electronics
    Cree has launched XLamp eTone LEDs, a set of chip-on-board (COB) LEDs that delivers 90 colour rendering index (CRI) light quality at the same efficacy as today’s standard 80 CRI LEDs. They also deliver ...
  • Long-life LED for general lighting
    30 January 2019, OSRAM Opto Semiconductor SA, Opto-Electronics
    The new Osconiq S3030 is OSRAM Opto Semiconductor’s entry into the professional mid-power market. The LED is ideal for use in outdoor and industrial lighting, providing flexibility in forward voltage ...
  • Non-volatile F-RAM ICs
    30 January 2019, Altron Arrow, DSP, Micros & Memory
    Cypress Semiconductor’s new Excelon LP ferroelectric random access memory (F-RAM) delivers instant-write capabilities with virtually unlimited endurance, enabling these applications to perform mission-critical ...
  • Programming and debugging probe
    14 November 2018, Altron Arrow, Design Automation
    STMicroelectronics has introduced the next-generation STLINK-V3 probe for programming and debugging STM8 and STM32 microcontrollers, adding enhancements to further increase flexibility and efficiency. ...
  • 1800 W electronic load
    14 November 2018, Conical Technologies, Test & Measurement, Power Electronics / Power Management
    Itech announced the release of the latest addition to its electronic load range, the IT8615. This e-Load has a compact height of only 3U for an 1800 Watt load, with an AC frequency adjustable from 45 ...
  • Electrical double-layer capacitors
    14 November 2018, Altron Arrow, Passive Components
    Vishay Intertechnology introduced a new series of ENYCAP electrical double-layer energy storage capacitors for energy harvesting, power backup and UPS power source applications. Available in power and ...
  • High-power electronic fuse
    14 November 2018, Altron Arrow, Circuit & System Protection
    Sustaining up to 4 A continuous current over a wide operating input voltage range of 8 V to 48 V, with low insertion loss thanks to its integrated low-RDS(ON) VIPower MOSFET, the STEF01 programmable electronic ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.