|
|
|
Buck-boost converters with I²C interface
30 January 2019, Power Electronics / Power Management
The MP8860 from Monolithic Power Systems is a synchronous 4-switch integrated buck-boost converter, which is capable of regulating the output voltage from 2,8 V to 22 V input voltage range with high efficiency. The integrated output voltage scaling and adjustable output current limit functions fit the USB Power Delivery (PD) requirement.
The device uses constant-on-time control in buck mode and constant-off-time control in boost mode, providing fast load transient response as well as smooth buck-boost mode transient. It provides auto PFM/PWM (pulse frequency modulation/ pulse width modulation) or forced PWM switching modes, and a programmable output constant current limit which supports flexible design for different applications.
The MP8860 also features over-current, over-voltage and under-voltage protection, programmable soft-start and thermal shutdown protection.
Also available is the MP8862, which offers output current up to 2 A, compared to the MP8860’s 1 A. Both devices have an I²C interface and are supplied in a 16-pin QFN (3 x 3 mm) package.
For more information contact NuVision Electronics, +27 11 608 0144, gdeklerk@nuvisionelec.co.za, www.nuvisionelec.com |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Rugged DC-DC converters
28 August 2019, Vepac Electronics, Power Electronics / Power Management
XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
- Power controller for smart home appliances
28 August 2019, RF Design, Power Electronics / Power Management
Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
- UPS battery configuration made easy
28 August 2019, Forbatt SA, Power Electronics / Power Management
Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
- Bidirectional laboratory power supply
28 August 2019, Vepac Electronics, Power Electronics / Power Management
EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
- 3 Watt DC-DC converters
28 August 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec has introduced three new series of switching regulators – the AMSRB1-78JZ, AMSRL1-78JZ and AMSRL-78JZ – all meeting the EN62368 standard and suitable for IoT (Internet of Things) applications.
The ...
- Isolated PFC module
28 August 2019, Conical Technologies, Power Electronics / Power Management
SynQor has added a new isolated PFC (power factor correction) module to its AeroQor range of products for the airborne electronics market. Featuring highly efficient active power factor correction, the ...
- DC-DC converter for DIN-rail mounting
28 August 2019, Vepac Electronics, Power Electronics / Power Management
MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
- NuVision Electronics to host wireless seminars
28 August 2019, NuVision Electronics, News
NuVision Electronics will soon be holding a seminar series highlighting its offering of technology for the wireless development ecosystem. The two seminars are free of charge to attend, and will take ...
- DC UPS for DIN-rail mounting
31 July 2019, Vepac Electronics, Power Electronics / Power Management
The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
- 80 V buck driver for LEDs
26 June 2019, Altron Arrow, Power Electronics / Power Management
Infineon Technologies’ new LED driver, the ILD8150/E, features an innovative hybrid dimming mode technology for achieving 0,5 percent of the target current. With its supply voltage range from 8 V up to ...
- AC-DC power supplies for medical devices
26 June 2019, Vepac Electronics, Power Electronics / Power Management
XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement.
The PBR500 and PBR650 ...
- N-channel enhancement mode FET
26 June 2019, Electrocomp, Power Electronics / Power Management
Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
|
|
