Bel Power Solutions and Protection’s new TSR10 is a robust, 10 kW, DC programmable laboratory power supply. It is a 3U, 19” rack mounted precision power supply which delivers clean and stable DC power, with operation allowed on any load from short- to open-circuit and constant voltage / constant current auto crossover.
Easy to use, the unit is ideal for testing in laboratories and for general industrial purposes, including research, component device testing, automated systems, aerospace and satellite testing. It has a 3-phase input voltage of 360-440 V a.c. with adjustable DC output voltage between 0,5 V and 50 V, and output current between 0,5 A and 200 A.
The front panel display contains settings for monitoring output voltage and current, including adjustable over-voltage, adjustable over-current, short circuit and feedback voltage proof, over-temperature (OTP), safe/auto start, front panel lock and phase loss detection.
Communications include a CAN interface and analog programming/monitoring (0-5 V or 0-10 V user-selectable); auto restart after power cut; mains, output voltage and current indication; front panel lock (selectable from the front panel and/or from the software); independent remote on/off and remote enable/disable; continuous encoders for voltage and current adjustment (coarse and fine mode); last setting memory; and remote reset.
Power management companion chips 29 April 2020, NuVision Electronics
, Power Electronics / Power Management
Silicon Labs announced a new line of energy-friendly power management ICs (PMICs) serving as dedicated companion chips for EFR32 wireless devices and EFM32 microcontrollers (MCUs).
The EFP01 PMIC ...
Read more...Automotive MOSFETs in a variety of packages 29 April 2020, Altron Arrow
, Power Electronics / Power Management
Reducing CO2 emissions of passenger cars is accelerating 48 V board net adoption. For this emerging 48 V market, Infineon Technologies offers a broad portfolio of automotive 80 V and 100 V MOSFETs as ...
Read more...DC-DC converter for aerospace/defence 25 March 2020, Future Electronics
, Power Electronics / Power Management
Vicor announced the DCM5614, an isolated, regulated 270 V-28 V DC-DC converter with an output power rating of 1300 W in a 142,2 x 35,6 x 9,4 mm VIA package. Providing power density of 27,52 W/cm3 at a ...
Read more...Switchers for high-power LED displays 25 March 2020, EBV Electrolink
, Power Electronics / Power Management
Power Integrations’ InnoSwitch3-MX isolated switcher IC family has been expanded with the addition of three new PowiGaN devices. As part of a chipset with Power Integrations’ InnoMux controller IC, the ...
Read more...Synchronous buck converter 29 April 2020, Altron Arrow
, Power Electronics / Power Management
Diodes Incorporated introduced the AP62600 synchronous DC-DC buck converter for point-of-load (POL) conversion in applications such as TVs, monitors, white goods, home appliances, consumer electronics ...
Read more...Tiny step-down regulator 29 April 2020, Altron Arrow
, Power Electronics / Power Management
The LTM4657 is part of Analog Devices’ family of tiny, high-efficiency, identical pin-out, step-down µModule devices. The LTM4657 is designed to operate at lower switching frequencies than the LTM4626 ...
Read more...Stackable DC-DC buck converter 29 April 2020, Avnet South Africa
, Power Electronics / Power Management
Texas Instruments introduced a new 40 A SWIFT DC-DC buck converter, offering first-of-its-kind stackability of up to four ICs. The TPS546D24A PMBus buck converter can deliver up to 160 A of output current ...
Read more...Open-frame configurable power supplies 29 April 2020, Vepac Electronics
, Power Electronics / Power Management
The RB series of configurable open-frame power supplies has been expanded. Based on a unique concept, the Cosel RB series offers three configurable isolated outputs, with one having a reinforced isolation ...
Read more...Why low quiescent current matters for longer battery life 29 April 2020, Avnet South Africa
, Power Electronics / Power Management
From healthcare and biosensing to wearables and environmental sensing, nearly all IoT devices rely on batteries that must perform reliably and over an extended period of time in a variety of conditions.
Read more...Bipolar DC-DC supply design sources and sinks current 29 April 2020, Altron Arrow
, Power Electronics / Power Management
Most electronic systems depend on power voltage rails that are either positive or negative, but a few applications require individual rails that can be both. In these situations, positive or negative ...
printer friendly version