|
|
Class 2 DIN rail power supply
27 February 2019, Power Electronics / Power Management
The DRL100 24-1/C2 DIN rail power supply, made by TDK-Lambda, has a 24 V output and delivers 88 W of output power, and is approved to meet the requirements of US NEC (National Electric Code) Class 2 in accordance with UL1310. This makes it suitable for use in building automation and security systems requiring restrictions on the amount of available output current to avoid wiring damage, even under fault conditions. The C2 model also benefits from a Class II construction (no ground wire needed).
The unit is housed in a robust plastic case, measuring 72 mm wide, 55,6 mm deep and 91 mm high, the same depth and height profile as the 10 to 100 W models in the DRL series. All DRL models will operate from a wide range input of 85–264 V a.c. and can withstand a 300 V a.c. peak for five seconds. Off-load power consumption is less than 0,5 W and the efficiency is 90% at full load with a 230 V a.c. input.
The DRL series has a Class II (double insulated) construction, requiring no earth ground connection, and 3000 V a.c. input to output isolation. All models are convection cooled and are rated for operation in -20°C to +71°C ambient temperatures (derating applies at high temperature).
The DRL series is certified to IEC/EN/UL/CSA 60950-1 and UL 508, and is CE marked for the Low Voltage, EMC and RoHS2 directives. All models meet EN55032-B conducted emissions, EN55032-A radiated emissions, EN 61000-3-2 harmonic currents and EN61000-4 immunity standards.
For more information contact Tobie Muller, Accutronics, +27 11 782 8728, tmuller@accutronics.co.za, www.accutronics.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Harvesting kinetic energy to power smart objects
27 February 2019, Avnet South Africa, Power Electronics / Power Management
As the world becomes increasingly smart and connected, batteries are not always the right choice in some of the emerging use cases.
- Identifying and remedying lead-acid battery failures
27 February 2019, Forbatt SA, Power Electronics / Power Management
Proper management and regular maintenance can extend the life of a battery, but what are the possible causes of failure and what should be done if a battery fails?
- Pros and cons of popular battery cell formats
27 February 2019, Uniross Batteries, Power Electronics / Power Management
Flat-cell designs are getting price competitive and battery experts predict a shift towards these cell formats, especially if the same performance criteria of the cylindrical cell can be met.
- Accutronics and TDK-Lambda – a powerful partnership
27 February 2019, Accutronics, Power Electronics / Power Management
Accutronics is a name familiar to readers of Dataweek and the South African electronics industry at large, having offered a range of products to the industry since 1973. The company was founded with a ...
- High-power DC laboratory PSU
27 February 2019, MB Silicon Systems, Power Electronics / Power Management
Bel Power Solutions and Protection’s new TSR10 is a robust, 10 kW, DC programmable laboratory power supply. It is a 3U, 19” rack mounted precision power supply which delivers clean and stable DC power, ...
- Battery optimisation software for IoT devices
27 February 2019, Concilium Technologies, Power Electronics / Power Management, Test & Measurement
Keysight Technologies has introduced the X8712A IoT device battery life optimisation software solution, to ensure optimal battery life prior to device deployment to accelerate troubleshooting and device ...
- High-voltage DC-DC converter
27 February 2019, Accutronics, Power Electronics / Power Management
TDK announced the introduction of the TDK-Lambda brand PH300A280-5 DC-DC converter, completing the PH-A280 series of 200 V to 425 V input, 50 W to 300 W power modules. The new model is designed for data ...
- Compact 750 W power supplies
27 February 2019, Vepac Electronics, Power Electronics / Power Management
The GSP750 series of 750 W continuous / 900 W peak AC-DC power supply units from XP Power come in a low-profile, 1U high chassis with a 10,16 x 25,4 cm footprint. The peak power capability of 900 W for ...
- ASIL-certified power MOSFET driver
27 February 2019, Altron Arrow, Power Electronics / Power Management
The AMT49105 is Allegro MicroSystems Europe’s newest ISO 26262 compliant N-channel power MOSFET driver, designed to simplify motor system designs and provide footprint reduction by integrating power analog ...
- Half-brick 150 W converters
27 February 2019, Vepac Electronics, Power Electronics / Power Management
New from XP Power is the QSB150 series of 150 W, half brick DC-DC converters, aimed at a wide range of applications where an ultra-wide input range is required.
Conforming to the industry standard half ...
- Power modules for EVs
27 February 2019, Future Electronics, Power Electronics / Power Management
ON Semiconductor has launched new automotive intelligent power modules (IPMs) that offer high power density and overall performance in on-board charging (OBC) and other high-voltage DC-DC conversion applications ...
- Step-down converters for low-power devices
27 February 2019, EBV Electrolink, Power Electronics / Power Management
STMicroelectronics’ ST1PS01 step-down converters are engineered for small size, low quiescent current and high efficiency at all values of load current, to save energy and real estate in keep-alive point-of-load ...
|
|
