Power Electronics / Power Management


Power unit for IP67 applications

27 March 2019 Power Electronics / Power Management

The main feature of the primary switched module PM-IP67A200 developed by MTM Power is its design suitable for applications with protection degree IP67. It is specifically designed for the electrical supply of control, sensor and actuating systems in the field directly at the application.

The power supplies of this series allow use as a ‘plug and play’ solution directly on-site. This is possible due to the connection via special 7/8" connectors and the thermoselective vacuum encapsulation developed by MTM.

The units are available with 24 V single and dual output voltages, and are certified according to the standards UL 60 950-1 and UL 508. They have a 90 - 264 V a.c. and 100 - 300 V d.c. input range, and are designed for worldwide use under extreme environmental conditions in on-machine applications.

As an option, units with 24 V output are also available with variable current limiting designed to allow a short increase of the output power to 150%. This function, known as power boost, allows application on motors, capacitive loads, etc. which exhibit difficult startup characteristics.

The outputs of the dual-output version are galvanically separated with 500 V a.c. isolation voltage and independently regulated. The devices are according to protection degree 1 and comply with the Low Voltage Directive as well with the up-to-date EMC standards as regards CE conformity. They are constantly short circuit protected, need no ground load, and operate within a temperature range of -25°C to +60°C.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Miniature 4,4 A boost converter
28 October 2020, iCorp Technologies , Power Electronics / Power Management
The SGM6623 from SG Micro is a general-purpose, miniature boost DC-DC switching regulator with high efficiency for battery backup and standby power systems. The acceptable input voltage range is between ...

Read more...
Power and signal connectors with selective mate keying
25 November 2020, Vepac Electronics , Interconnection
The SB Smart range from Anderson Power Products is designed for applications where storage batteries intelligently interact with the system. Two primary power positions (up to 230 A each) are combined ...

Read more...
Magnetic jack connectors and their benefits
25 November 2020, Vepac Electronics , Interconnection
EDAC’s product offering includes the edacJAX range of magnetic and modular jacks, offering many features and benefits. These connectors are used in data, telecom, networking and home entertainment markets ...

Read more...
Double the power output from new Tadiran battery
25 November 2020, Altron Arrow , Power Electronics / Power Management
Tadiran has developed the latest in its PulsesPlus HLC battery range, doubling the power output of its previous offering. Recently the company launched the C-type HLC which represented a huge improvement ...

Read more...
DIN-rail power supplies for harsh conditions
25 November 2020 , Power Electronics / Power Management
Available from Traco Power is a dedicated series of DIN-rail power solutions for harsh industrial applications. The TSP series’ high immunity against electrical disturbances and rugged metal casing ...

Read more...
SiC diodes for electric vehicles
25 November 2020, Altron Arrow , Power Electronics / Power Management
As vehicle electrification continues rapid growth worldwide, innovative power technologies such as silicon carbide (SiC) are required for high-voltage automotive systems ranging from motors to on-board ...

Read more...
Single-cell battery charger
25 November 2020, iCorp Technologies , Power Electronics / Power Management
The SGM41511 is a battery charger and system power path management device with integrated converter and power switches for use with single-cell Li-ion or Li-polymer batteries. This highly integrated 3 A ...

Read more...
Locally designed gang battery charger
25 November 2020, Seven Labs Technology , Power Electronics / Power Management
Made by Seven Labs Technology, the JuiceBar has 10 individually configurable chargers, each of which can be configured to charge the battery with a charge current of up to 2 A. What really makes the JuiceBar ...

Read more...
Regenerative power system integrating two instruments
25 November 2020, Conical Technologies , Power Electronics / Power Management
The IT-M3600 regenerative power system from ITECH integrates two instruments in one, those being a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery ...

Read more...
Battery manufacturer enters South African market
25 November 2020 , Power Electronics / Power Management
Energon, a leading battery manufacturer based in Russia, has expanded its global presence to include new subsidiaries in Turkey (as the centre of a new cluster for eastern Europe, the Middle East and ...

Read more...