|
|
|
New scan capabilities for EMI receiver
29 May 2019, Test & Measurement
Keysight Technologies has added time domain scan (TDS) and real-time scan (RTS) capabilities to the N9048B PXE electromagnetic interference (EMI) receiver, enabling real-time measurements and diagnostics for faster electromagnetic compliance (EMC) certification.
EMC testing requires detailed and exacting methodologies to ensure that all emissions are accurately measured. Long test times impact test facility availability and reduce the number of devices that can be certified. It’s also easy to miss intermittent disturbance signals with conventional scan mode since long dwell time is required at each frequency.
The new TDS and RTS capabilities enable independent compliance test laboratories, as well as in-house self-certification labs, to shorten overall test time and easily perform gapless signal capture and analysis, certifying that a product meets regulatory compliance standards.
The N9048B PXE EMI receiver, with three frequency ranges up to 26,5 GHz, delivers full compliance with CISPR 16-1-1:2015 and MIL-STD-461G (2015). It provides full signal visibility, where the RTS provides gapless signal capture and analysis in up to 350 MHz bandwidth and simultaneously displays the frequency domain, time domain and spectrogram, with three EMC detectors.
For more information contact Tshiamo Mogakwe, Concilium Technologies, +27 12 678 9200, info@concilium.co.za, www.concilium.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- EMI compliance testing vs. pre-compliance testing
25 September 2019, Concilium Technologies, Circuit & System Protection
Electromagnetic interference (EMI) is caused by unintentional emissions from electronic equipment. Compared to natural sources of EMI, such as lightning and solar storms, engineers are more concerned ...
- Automotive Ethernet testing software
25 September 2019, Comtest, Test & Measurement
Tektronix has released two new software packages that greatly simplify Automotive Ethernet testing, debug and protocol decode for use with its 5 and 6 Series mixed-signal oscilloscopes (MSO).
Using ...
- 4-channel PC-based oscilloscope
28 August 2019, Vepac Electronics, Test & Measurement
The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
- Handheld PoE tester
26 June 2019, Coral-i Solutions , Test & Measurement
Ideal Networks has launched a new handheld tester that eliminates guesswork when installing, maintaining and troubleshooting PoE devices and data cabling. PoE Pro measures and reports PoE class, voltage/voltage ...
- Debugging probe for STM32 MCUs
31 July 2019, Altron Arrow, Test & Measurement
The STLINK-V3MINI probe, new from STMicroelectronics, combines the features of the STLINK-V3SET with standalone simplicity for faster programming and ease of use.
The compact, portable probe can be ...
- Digitiser for advanced applications
31 July 2019, Comtest, Test & Measurement
Tektronix, Inc. has unveiled the 6 Series low-profile digitiser, a 4-channel instrument offering up to 8 GHz bandwidth, 25 GSps sampling rate and a 12-bit ADC (analog-to-digital converter) on every channel, ...
- Cost-effective tools for makers and small businesses to innovate
31 July 2019, TRX Electronics, Test & Measurement
In addition to professional engineers, makers and hobbyists are now able to contribute significantly to innovation in our modern world – as they can develop ideas with passion and without the financial and logistical constraints that often stifle ideas in large corporations.
- Sniffer software gets J-Link RTT terminal plugin
31 July 2019, RF Design, Test & Measurement
Despite being fans of the Real-Time Trace (RTT) feature in Segger’s J-Link debug probes, engineers at Tibbo found that Segger’s own RTT Viewer software was a bit too simple for their needs, and so created ...
- EXFO launches new category of fibre testing solutions
26 June 2019, Lambda Test, Test & Measurement
EXFO has launched what it describes as the first optical fibre multimeter (OFM).
Called Optical Xplorer, it aims to make fibre testing simple for all frontline technicians, whether beginner or expert, ...
- Handheld industrial Ethernet tester
26 June 2019, Coral-i Solutions , Test & Measurement
Ideal Networks has launched NaviTEK IE, a handheld network tester designed for commissioning, preventative maintenance and troubleshooting of PROFINET industrial Ethernet networks, plus standard Ethernet ...
- PCB cleaning diagnostic system
26 June 2019, Electronic Industry Supplies, Test & Measurement
The Verinas system from PBT Works is a dedicated piece of AOI (automatic optical inspection) equipment for evaluating remaining flux residues on PBT glass test boards.
The system can be used by electronics ...
- 2-channel digital storage oscilloscope
26 June 2019, Vepac Electronics, Test & Measurement
The Model 1335 is PeakTech’s latest-generation 2-channel digital storage oscilloscope (DSO) for the education and professional sector. With its attractive price-performance ratio, modern technology and ...
|
|
