Power Electronics / Power Management


Lithium battery charger IC

31 July 2019 Power Electronics / Power Management

The MP2667 from Monolithic Power Systems is a highly integrated, single-cell, Li-ion/Li-polymer battery charger with system power path management for space-limited portable applications. The MP2667 takes input power from either an AC adaptor or a USB port to supply the system load and charge the battery simultaneously. The charger function features constant-current pre-charge, constant-current fast charge and constant-voltage regulation, charge termination and auto-recharge.

The power path management function ensures continuous power to the system by automatically selecting the input, battery, or both to power the system. This power stage features a low-dropout regulator from the input to the system and a 100 mΩ switch from the battery to the system. Power path management separates the charging current from the system load, which allows for proper charge termination and keeps the battery in full-charge mode.

The MP2667 provides a system short-circuit protection (SCP) function by limiting the current from the input to the system and the battery to the system. This feature is especially critical for preventing the Li-ion battery from being damaged due to excessively high currents.

An on-chip battery under-voltage lockout (UVLO) cuts off the path between the battery and the system if the battery voltage drops below the programmable battery UVLO threshold. This prevents the Li-ion battery from being over-discharged.

An integrated I2C control interface allows the MP2667 to program the charging parameters, such as the input current limit, input minimum voltage regulation, charging current, battery regulation voltage, safety timer, and battery UVLO.

The MP2667 is available in a 10-pin QFN (2 x 2 mm) package.

For more information contact NuVision Electronics, +27 11 608 0144, gdeklerk@nuvisionelec.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cosel expands microprocessor controlled power supplies offering
31 August 2020, Vepac Electronics , Power Electronics / Power Management
Cosel has announced the addition of a 3000 W AC/DC enclosed power supply for industrial and demanding semiconductors applications. Designed with advanced built-in digital microprocessor technology, the ...

Read more...
Boost charger for 2-cell series lithium-ion battery
29 July 2020, NuVision Electronics , Power Electronics / Power Management
The MP2672 from Monolithic Power Systems is a highly integrated, flexible switch-mode battery charger IC for a lithium-ion battery with two cells in series, which is used in a wide range of portable applications. When ...

Read more...
LED dimming signal interface controller
29 July 2020 , Power Electronics / Power Management
The AL8116, made by Diodes Incorporated, is a flexible dimming signal interface controller that can convert the three different inputs of dimmer types including 0-10 V d.c. linear dimming, 0 to 100% duty ...

Read more...
USB Type-C charging controllers
29 July 2020, Avnet Silica , Power Electronics / Power Management
Designers can overcome the challenges of implementing USB-C Power Delivery (PD) with the MAX77958 USB-C PD controller and the MAX77962 28 W buck-boost charger from Maxim Integrated Products. As portable ...

Read more...
All-in-one DC UPS units
29 July 2020, Current Automation , Power Electronics / Power Management
Thanks to the range of all-in-one DC UPS units from ADEL System, it is possible to optimise power management for many applications. The available power is automatically allocated between load and battery; ...

Read more...
Power supplies for flicker-free LED driving
31 August 2020, Current Automation , Power Electronics / Power Management
A feature of Mean Well’s new LDC-35/80 family of LED drivers is the stabilisation of the output power. The specified operating mode ensures the constancy of the output power when the source operates within ...

Read more...
Healthcare, industrial and ITE power supplies
31 August 2020, Vepac Electronics , Power Electronics / Power Management
New from XP Power is the ECH450 series of compact, high-efficiency power supplies available in open-frame or a range of enclosed formats. Delivering 250 W when convection cooled and the full 450 W when ...

Read more...
Flicker-free LED driver with 3-in-1 dimming
29 July 2020, Current Automation , Power Electronics / Power Management
A feature of Mean Well’s new LDC-35/80 family of LED drivers is the stabilisation of the output power. The specified operating mode ensures the constancy of the output power when the source operates within ...

Read more...
MOSFET half-bridge power stage
30 June 2020, Altron Arrow , Power Electronics / Power Management
Vishay Intertechnology introduced a new 30 V n-channel MOSFET half-bridge power stage that combines a high-side TrenchFET MOSFET and low-side SkyFET MOSFET with integrated Schottky diode in one compact ...

Read more...
Programmable electronic DC loads with energy recovery
30 June 2020, Vepac Electronics , Power Electronics / Power Management
Elektro-Automatik’s new series of electronic DC loads with energy recovery to mains, called EA-ELR 9000 HP, is an advancement of the series EA-ELR 9000. It offers a wider AC input range for operation ...

Read more...