mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

DC-DC converter for DIN-rail mounting
28 August 2019, Power Electronics / Power Management

MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different applications where low power is needed. Due to their thermo-selective vacuum encapsulation, they exhibit elevated protection against dust and humidity and are especially robust against mechanical stresses like shock and vibration.

The 15 W or 30 W modules are available with single outputs of 12 V, 24 V and 48 V. They offer an isolation of 3,3 kV a.c. between input and output and comply with the up-to-date EN standards as regards CE conformity. Further features are SMD technology supported production, 100% burn-in test and automatic 100% final test.

The HSD series is short circuit protected, needs no ground load and operates in a temperature range between -25°C and +70°C.

For more information contact Vepac Electronics, +27 11 454 8053, sales@vepac.co.za , www.vepac.co.za


Credit(s)
Supplied By: Vepac Electronics
Tel: +27 11 454 8053
Fax: +27 11 608 1661
Email: sales@vepac.co.za
www: www.vepac.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • X-capacitor discharge ICs
    25 September 2019, MB Silicon Systems, Power Electronics / Power Management
    Power Integrations announced CAPZero-3, the latest generation of the company’s energy-saving X-capacitor discharge ICs. Two-terminal CAPZero-3 ICs enable designers to meet IEC60335 safety approvals for ...
  • Controllers for new PoE standard
    25 September 2019, EBV Electrolink, Power Electronics / Power Management
    ON Semiconductor is supporting the IEEE 802.3bt standard with a growing portfolio of compliant products and technologies. Using the new IEEE 802.3bt standard, Power over Ethernet (PoE) can be used to ...
  • Battery protectors with integrated fuel gauges
    25 September 2019, CST Electronics, Power Electronics / Power Management
    Designers concerned about battery safety now have access to an advanced battery protector with integrated fuel gauges from Maxim Integrated Products. The newest 1-cell, pack-side ICs in this portfolio ...
  • Flexible digital power-factor controller
    25 September 2019, Altron Arrow, Power Electronics / Power Management
    Combining the flexibility of digital power with the responsiveness of analog algorithms, STMicroelectronics’ STNRGPF12 dual-channel interleaved boost-PFC (power factor correction) controller is easily ...
  • Isolated industrial drive switches
    25 September 2019, NuVision Electronics, Power Electronics / Power Management
    Silicon Labs has introduced a family of compact, robust isolated smart switches designed to drive any load, even in the harshest industrial environments. The new Si834x isolated switches are ideal for ...
  • High-voltage rack-mount PSUs
    25 September 2019, Vepac Electronics, Power Electronics / Power Management
    XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature ...
  • Power controller for smart home appliances
    28 August 2019, RF Design, Power Electronics / Power Management
    Qorvo has introduced a new intelligent power control solution for reducing energy consumption, bulk, weight and noise in smart home appliances, AC-powered fans and compressors. This mixed-signal system-in-package ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • UPS battery configuration made easy
    28 August 2019, Forbatt SA, Power Electronics / Power Management
    Determining the UPS (uninterruptible power supply) battery configuration using a formula can be quite complicated and, since many users are not very familiar with it, a more simplified method can be used ...
  • Digital fibre-optic sensor
    28 August 2019, Vepac Electronics, Opto-Electronics
    The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...
  • All-in-one light pipe system
    28 August 2019, Vepac Electronics, Opto-Electronics
    Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...
  • Bidirectional laboratory power supply
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.