|
|
High-voltage rack-mount PSUs
25 September 2019, Power Electronics / Power Management
XP Glassman Power has introduced a series of rack-mount, high-voltage DC power supplies (PSU) able to supply up to 60 kV. Aimed at laboratories and OEMs, the EY series of 1200 W power supplies feature flexible embedded controls with low ripple and noise. They are air-insulated, fast-response units with tight regulation and extremely low arc discharge currents.
For use in the medical, industrial and general high-voltage areas, the most important applications for the EY series are in vapour deposition, ion implantation, glow discharge, electrostatics, plasma sources, cyclotrons, X-ray and other vacuum tubes.
The EY series comprises of 16 models from 0-1 kV to 0-60 kV at 1200 W output power. Typically, ripple is less than 0,02% RMS of rated voltage at full load and off-the-line pulse-width modulation provides high efficiency and a reduced parts count for improved reliability. The first four models in the range respectively feature reversible polarity, and the others can be purchased as positive or negative polarity units.
The units feature automatic crossover from constant-voltage to constant-current regulation, providing protection against overloads, arcs and short circuits. The power supplies’ arc quench feature ensures that the HV output is inhibited for a short period after each load arc to help extinguish the arc, whilst their remote analog and digital control via RS-232 and USB offers flexibility of integration with customers’ systems. Similarly, optional Ethernet control provides the possibility of control and monitoring from remote locations.
The EY series’ bench/2U rack-mount format makes them suitable for location on a test bench or for integrating with other equipment in a standard 19-inch rack, and featuring embedded microcontroller control, front panel digital encoders on the units provide high-resolution local adjustment of voltage and current programme.
The power supplies can operate from single-phase AC supplies of 180 to 264 V, and are fully RoHS and CE compliant. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- 6U VPX power supply
23 October 2019, Conical Technologies, Power Electronics / Power Management
SynQor announced its new universal 85 to 264 Vrms AC-input VPX power supply for critical military, aerospace and shipboard applications. This 6U VPX power supply, designed to meet VITA 46 standards, allows ...
- Automotive H-bridge driver
23 October 2019, Altron Arrow, Power Electronics / Power Management
The TLE985x H-bridge MOSFET driver IC product family from Infineon Technologies is an ideal fit for compact and cost-effective motor control solutions. It targets automotive applications such as sunroof, ...
- 40 Watt DC-DC converters for industrial use
23 October 2019, Conical Technologies, Power Electronics / Power Management
Traco Power announced the release of its new TEN 40WEI range of industrial converters. Due to a new design approach, it offers a cost-efficient solution with no concession on quality or reliability as ...
- Buck converter with lowest quiescent current
23 October 2019, Avnet South Africa, Power Electronics / Power Management
Texas Instruments introduced an ultra-low-power switching regulator with what it claimed as the industry’s lowest operating quiescent current (IQ) at 60 nA. The TPS62840 synchronous step-down converter ...
- 60 V synchronous buck converter
23 October 2019, NuVision Electronics, Power Electronics / Power Management
The MPQ4572 is a fully integrated, fixed-frequency synchronous step-down converter. It can achieve up to 2 A continuous output current with peak current control for excellent transient response. The wide ...
- Battery design trends for IoT
23 October 2019, Avnet South Africa, Power Electronics / Power Management
Ultimately, the choice of battery for any application in the Internet of Things will depend on the power profile of the application, in combination with any environmental factors such as temperature.
- Points to consider when running power supplies from portable generators
23 October 2019, Accutronics, Power Electronics / Power Management
Manufacturers of end systems should specify what class of generator their products should be used with, and should question what class was used if they do see equipment failures.
- Developing opportunities around ‘hybrid’ renewable energy power plants
23 October 2019, Forbatt SA, Power Electronics / Power Management
If we let our imaginations run wild in the local context – and imagine the possibilities that come from having the cheapest energy in the world – the creative minds amongst us could have a field day.
- High-voltage power supplies
23 October 2019, Vepac Electronics, Power Electronics / Power Management
The XP Emco range of high-voltage power supplies meets a wide range of high-performance demands. It includes a broad range of DC-DC converter modules with output voltages from 100 V to 10 kV in both proportional ...
- 5 Watt AC-DC converter
23 October 2019, Avnet South Africa, Power Electronics / Power Management
Aimtec’s new AMEL5-277NZ is an AC-DC converter which has been designed to offer greater economies of scale due to greater production automation, leading to improved reliability and performance. The product ...
- USB Type-C power controllers
23 October 2019, Avnet South Africa, Power Electronics / Power Management
Microchip announced two new solutions that simplify USB Type-C PD (Powered Device) designs to remove the traditional complexity and high costs associated with implementing USB Type-C in a range of applications.
...
- 0,6 A and 1 A point-of-load converters
23 October 2019, Conical Technologies, Power Electronics / Power Management
Traco Power announced a new addition to its TSR-WI range: the TSR-WI line is a set of non-isolated point-of-load (POL) converter series with an ultra-wide 8:1 input voltage range, which come in standard ...
|
|
