News


From the editor's desk: No more Moore?

7 September 2016 News

When Gordon Moore predicted in 1965 that the number of components that could be squeezed into an integrated circuit would double each year, he only expected this rate of growth to continue for a decade. In 1975 he revised his forecast for the following decade down to a doubling every two years. Over the years many have misquoted or paraphrased what came to be known as ‘Moore’s law’, but his prediction has continued to prove surprisingly resilient to advances in semiconductor technology.

Now, though, most industry experts believe Moore’s law has just about run its course, and even he himself has stated that he envisages an imminent saturation point. A fitting time, then, for one of the most widely respected roadmaps for semiconductor innovation to close the book on an era. For the last 25 years, the International Technology Roadmap for Semiconductors (ITRS) has surveyed many of the world’s leaders in the field on the technological challenges and opportunities for the semiconductor industry. The recently released 2015 edition of the ITRS will be its last, although it will be succeeded by a more generalised roadmap, named the International Roadmap for Devices and Systems (IRDS), which forms part of the IEEE’s ‘Rebooting Computing’ initiative. More information on this initiative can be found at its online home, http://rebootingcomputing.ieee.org.

The latest edition of the ITRS is sponsored by five regions of the world – Europe, Japan, Korea, Taiwan and the United States. Through the cooperative efforts of the global chip manufacturers and equipment suppliers, research communities and consortia, it identifies critical gaps, technical needs and potential solutions related to semiconductor technology.

In summarising where the industry stands at present, the report states that “In the past 15 years the advent of the Internet, the extensive deployment of Wi-Fi base stations, consumer acceptance of a broad variety of wireless mobile appliances plus the successful combination of fabless companies working in conjunction with foundries, has completely changed the electronics industry... System Integrators can nowadays integrate multiple functionalities in a single chip called System on Chip (SoC) or by means of integrating multiple dice in a single package called System in Package (SIP) as opposed to connecting multiple specialised ICs on a board... System integrators are by and large setting the pace of innovation for the electronics industry.”

It goes on to describe how each new technology generation has tended to produce transistors that can switch faster than those of the previous generation. In the past this electrical feature of transistors enabled microprocessors to operate at higher frequencies and therefore computer performance, as measured by industry benchmarks like millions of instruction executed per second (MIPS), continued to improve at very fast rates.

“Through the years nobody paid too much attention to the fact that power consumption of integrated circuits kept on increasing with any new technology generation, since the industry motto was ‘performance at any cost’, the report points out. This approach came to an end at the beginning of the past decade when fundamental thermal limits were reached by some ICs, resulting in the need to either throttle frequency or reduce the number of transistors. Frequency was selected as the sacrificial victim and it has stalled in the few GHz since the middle of the previous decade.

“These limitations on maximum useable frequency have impacted the rate of progress of the computer industry that has been compelled to develop such methods as complex software algorithms and clever instruction management to improve performance to partially compensate for the aforementioned conditions,” the ITRS continues. As a result, microprocessor architecture has evolved from single- to multi-core, allowing processors to run in the few GHz range while the output rate is increased multifold by combining the output of multiple cores to produce the output signal. Unfortunately this parallel type of solution cannot be used in all cases since some problems can only be solved in a serial way.

Looking ahead to the next 15 years, the roadmap foresees advances in three-dimensional chip structures overcoming the current power scaling bottleneck, and explores multiple new and exciting devices that, after 10 years of research, are demonstrating the possibility of becoming key players in the next decade.

Unsurprisingly, the Internet of Things (IoT), or rather what it describes as the Internet of Everything (IoE), receives special attention as an area of technology that will increasingly open up new applications, help to create new industries, and furthermore play a role in shaping our very society.

Brett van den Bosch

Editor



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

From the editor's desk: The art of measuring the truth
Technews Publishing Editor's Choice News
All electronic measurements are a lie. The trick is making the lie as small as possible.

Read more...
TSE has relocated
News
The Technology Station in Electronics (TSE) has entered a new chapter with its relocation from the CSIR campus to TUT-owned building at Ditsela Place in Hatfield.

Read more...
Innovative MyLegrand app
RS South Africa News
Legrand SA is set to launch the MyLegrand mobile application, a digital platform designed to strengthen engagement across its professional network.

Read more...
Kulani Energy acquires critical assets from Optipower
News
Kulani Energy preserves engineering, procurement, and construction capability and positions a wholly women-owned firm at the forefront of South Africa’s grid expansion.

Read more...
From Cape Town to Johannesburg
News
Würth Elektronik South Africa has taken a significant step forward with its recent relocation from Cape Town to Johannesburg, marking a new phase of growth and ambition for the company.

Read more...
Lesley Havenga: Building partnerships for Africa’s electronics future
Editor's Choice News
As Würth Electronik expands its footprint across South Africa and the broader sub-Saharan region, Havenga’s blend of manufacturing expertise, supply chain knowledge, and people-centred leadership appears well suited to the task.

Read more...
Tackling e-waste with help from international partners
News
Every year millions of electrical and electronic devices and appliances, including mobile phones and computers, are thrown away and these items are now the fastest growing waste stream in the world.

Read more...
From the editor's desk: Pricing surge reshapes engineering reality
Technews Publishing News
The recent and continuing surge in memory prices has become more than a supply-chain story confined to global semiconductor markets. We have watched in disbelief as the ASP of memory has risen by over ...

Read more...
Siemens democratises EDA software access
News
This collaboration will provide streamlined access to advanced electronic design automation software for European semiconductor innovation.

Read more...
Components distribution: A promising trend
News
The European electronic components market returned to solid growth in Q1, gaining 16,9%, with broad, but uneven, momentum across the region.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved