Telecoms, Datacoms, Wireless, IoT


One communications handset will be all we need in future reckons presenter at SATNAC

4 October 2006 Telecoms, Datacoms, Wireless, IoT

The next development step in telecommunications is the convergence of the fixed and mobile networks to give customers the unique experience of communicating across both networks using one handheld device.

That is the word from Preggie Govender, Executive Technology Management for Saab Grintek's carrier division, who presented at SATNAC, the annual South African Telecommunications and Network Applications Conference.

He said that UMA - unlicensed mobile access, is the first step in this convergence process and is already well developed. The next step is for end-user device manufacturers to bring out a handset that can handle calls and data from both networks selecting the one that provides the best communication at a given place and time.

Unlicensed mobile access (UMA) technology provides access to GSM and GPRS mobile services as well as unlicensed spectrum technologies, including Bluetooth and 802.11 (WiFI). By deploying UMA technology, service providers can enable subscribers to roam and handover between cellular networks and public unlicensed wireless networks using dual-mode mobile handsets. With UMA, subscribers receive a consistent user experience for their mobile voice and data services as they transition between networks.

How does it work?

A mobile subscriber with a UMA-enabled, dual-mode handset moves within range of an unlicensed wireless network to which the handset is allowed to connect. Upon connecting, the handset contacts the UMA network controller (UNC) over the broadband IP access network to be authenticated and authorised to access voice and data services. If approved, the subscriber's current location information stored in the core network is updated, and from that point on all mobile voice and data traffic is routed to the handset via the unlicensed mobile access network rather than the mobile radio access network.

When a UMA-enabled subscriber moves outside the range of an unlicensed wireless network to which they are connected, the UMA controller and handset facilitate roaming back to the mobile network. This roaming process is completely transparent to the subscriber.

If a subscriber is on an active GSM voice call or GPRS data session when they come within range (or out of range) of an unlicensed wireless network, that voice call or data session can automatically handover between access networks with no discernable service interruption.

"The concept of fixed mobile convergence should be attractive to fixed line operators as they will be able to grow their customer base by offering access to MobileVoice and data to their customers once they move outside the locally-enabled UMA system connected to their network," Govender said. "In other words, one can start a telephone conversation in the office or home, using a fixed line connection and continue the conversation from the car without the need to redial or interrupt the conversation."

"It may sound like science fiction," Govender said. "It is real. A number of equipment suppliers within the wireless industry have jointly developed a set of open specifications. In addition to developing and maintaining the initial specifications, the participating companies are actively working with the 3GPP standards organisation to use the specifications as the basis for the development of a formal standard."

As part of his SATNAC presentation, Govender showed a table of UMA features which clearly illustrated the advanced state of the development of such a system and the quality of service that customers can expect.

Saab Grintek is working closely with a number of technology partners in evaluating UMA as a solution for fixed mobile convergence in South Africa.

For more information contact Linda Weaver, Saab Grintek, +27 (0)12 672 8216, [email protected]





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SMT-mountable card connectors
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik introduces four new SMT-mountable Nano SIM and microSD card connectors and expands its range with solutions for the smallest packages.

Read more...
Module for smart city and smart utility devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has launched the Quectel KCM0A5S, a high-performance Wi-SUN module designed for smart applications such as street lighting, precision agriculture, industrial IoT, smart meters and smart cities.

Read more...
Ultra-low-power wireless module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.

Read more...
Quectel partners with GEODNET
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has partnered with GEODNET to deliver Quectel’s Real-Time Kinematic (RTK) correction services, enabling high-precision positioning for IoT applications.

Read more...
Bringing Bluetooth Channel Sounding to automotive and beyond with KW47
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.

Read more...
Dual-band GNSS antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas Accura GVLB258.A, is a passive, dual-band GNSS L1/L5, high-performance antenna for high precision GNSS accuracy and fast positioning.

Read more...
What is Wi-Fi HaLow and why choose it for IoT?
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Wi-Fi HaLow introduces a low power connectivity option that, in contrast to other Wi-Fi options, offers greater range of approximately 1 km, which opens up a raft of IoT use cases.

Read more...
Wi-Fi 6 and Bluetooth LE coprocessor module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.

Read more...
Futureproofing IoT connectivity
SIMcontrol Telecoms, Datacoms, Wireless, IoT
A managed private APN assigns every device to an isolated carrier slice, producing a single ingress to the enterprise network, with traffic bypassing shared internet paths and reducing exposure.

Read more...
Extra slim 2,4 GHz radio module
Telecoms, Datacoms, Wireless, IoT
The Thyone I radio module from Würth Elektronik now has a little sibling: Thyone-e, which takes up 30% less space and represents a cost-effective alternative for applications in which the long-range mode is not required.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved