News


Scientists create lightsaber tech, sort of (probably not)

23 October 2013 News

A team of researchers has created the technology to make an actual lightsaber (for those who don't know what this is, it's a... well, just look it up on Wikipedia). Only they haven't. Not really. But that hasn't stopped Star Wars nerds from frothing at the mouth and setting the Internet ablaze with the 'news'.

The hype

What the team at the Harvard-MIT Centre for Ultracold Atoms has actually accomplished is the minor feat of creating a completely new form of matter, one which had previously only been theorised and whose existence runs contrary to decades of accepted wisdom about the nature of light.

According to one of the research group leaders, Harvard Professor of Physics Mikhail Lukin, photons have long been described as massless particles which don’t interact with each other – shine two laser beams at each other, he said, and they simply pass through one another. What he and the other team members, including second leader, MIT Professor of Physics, Vladan Vuletic, have managed to do is contradict the conventional wisdom by coaxing photons into binding together to form molecules.

“Most of the properties of light we know about originate from the fact that photons are massless, and that they do not interact with each other,” Lukin explained. “What we have done is create a special type of medium in which photons interact with each other so strongly that they begin to act as though they have mass, and they bind together to form molecules. It’s not an inapt analogy to compare this to lightsabers.” No doubt it’s this statement which was (in)advertently responsible for the hype which ensued.

The science

The researchers began by pumping rubidium atoms into a vacuum chamber, then used lasers to cool the cloud of atoms to just a few degrees above absolute zero. Using extremely weak laser pulses, they then fired single photons into the cloud of atoms.

As the photons enter the cloud of cold atoms, its energy excites atoms along its path, causing the photon to slow dramatically. As the photon moves through the cloud, that energy is handed off from atom to atom, and eventually exits the cloud with the photon.

“When the photon exits the medium, its identity is preserved,” Lukin said. “It’s the same effect we see with refraction of light in a water glass. The light enters the water, it hands off part of its energy to the medium, and inside it exists as light and matter coupled together, but when it exits, it’s still light. The process that takes place is the same, it’s just a bit more extreme – the light is slowed considerably, and a lot more energy is given away than during refraction.”

When Lukin and colleagues fired two photons into the cloud, they were surprised to see them exit together, as a single molecule. The mechanism responsible for this is called a Rydberg blockade, which states that when an atom is excited, nearby atoms cannot be excited to the same degree.

In practice, the effect means that as two photons enter the atomic cloud, the first excites an atom, but must move forward before the second photon can excite nearby atoms. The result is that the two photons push and pull each other through the cloud as their energy is handed off from one atom to the next.

The relevance

Practical applications for the discovery include quantum computing, where it could be used to create quantum switches or photonic logic gates, or even classical computing where it could aid the development of optical routers that convert light signals into electrical signals. Lukin also suggested that the system might one day be used to create complex three-dimensional structures – such as crystals – wholly out of light.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

From the Editor's desk: Growth through inclusivity
Technews Publishing News
As the engineering fields in South Africa continue to make progress toward gender equality, we are finally starting to see the presence and contribution of women in engineering and industrial roles.

Read more...
KITE 2025 proves its value
News
The KwaZulu-Natal Industrial Technology Exhibition (KITE) 2025 confirmed its place as KwaZulu-Natal’s must-attend industrial event, drawing thousands of industry professionals.

Read more...
Otto Wireless Solutions announces promotion of Miyelani Kubayi to technical director
Otto Wireless Solutions News
Otto Wireless Solutions is proud to announce the promotion of Miyelani Kubayi to the position of technical director, effective 1 August 2025.

Read more...
DMASS experiences continued slowdown
News
The European electronic components distribution market continued its downward trajectory in the second quarter of 2025, according to new figures released by DMASS.

Read more...
World-first zero second grid-to-backup power switch
News
JSE-listed cable manufacturer, South Ocean Electric Wire, has completed a solar installation it says marks a global first: a seamless switch from grid to backup power in zero seconds.

Read more...

News
OMC deploys cobots to improve throughput 10x, while maintaining quality and ensuring consistency of fibre optic production.

Read more...
Cobots for opto production line
News
OMC deploys cobots to improve throughput 10x, while maintaining quality and ensuring consistency of fibre optic production.

Read more...
SACEEC celebrates standout industrial innovation on the KITE 2025 show floor
News
Exhibitor innovation took the spotlight at the KITE 2025 as the South African Capital Equipment Export Council announced the winners of its prestigious New Product & Innovation Awards.

Read more...
SA team for International Olympiad in Informatics
News
The Institute of Information Technology Professionals South Africa has named the team that will represent South Africa at this year’s International Olympiad in Informatics.

Read more...
Anritsu and Bluetest to support OTA measurement
News
Anritsu Company and Sweden-based Bluetest AB have jointly developed an Over-The-Air measurement solution to evaluate the performance of 5G IoT devices compliant with the RedCap specification.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved