Larger ergonomically-shaped 'bodycases'

21 May 2003 Manufacturing / Production Technology, Hardware & Services

OKW's recently introduced ERGO-CASE series has now been supplemented by a larger version. The series of cases can either be used as 'bodycases' for carrying on the body, or universally, as handheld, desktop or wall-mounted cases. The ERGO-CASES are ideally suited for visually demanding fields of application in mobile data acquisition and transmission in the fields of medical, laboratory and measuring technology, in storage and sales logistics.

The new ERGO-CASE L was designed as a three-part system, consisting of top and bottom parts as well as a snap-in battery compartment lid. The individual parts are connected to each other using four self-tapping screws on the underside of the case. The screw devices have been recessed; suitable case feet can subsequently be attached here. This technology also offers a visual advantage, for the attachment is out of the field of vision of the user, yet remains accessible at all times. The rounded operating panel in the upper part represents the area for the input, read-off and control of the terminal units. This surface is recessed by 1,0 mm and offers optimum protection for membrane keyboards or rubber keyboards. The sides are rounded, making the case comfortable to hold in the hand.

The external dimensions of the L size are 150 x 200 x 54 mm (L x W x H). If more volume is required, versions that are 15 mm higher can be ordered. The standard colours: off-white (RAL 9002) and black (RAL 9005). Can comply with IP54 protective class. A strap eyelet attachment is also available as an optional extra. Webbing belts as well as thin belts can quickly and easily be threaded into these two devices.

For more information contact Avnet Kopp, 011 809 6100.

Further reading:

20 years of precision, progress and purpose – the Jemstech journey
Jemstech Editor's Choice Manufacturing / Production Technology, Hardware & Services
Twenty years ago, Jemstech began as a small, determined venture built on technical excellence and trust. Today, it stands among South Africa’s leading electronic manufacturing service providers.

Read more...

---

An argument to redefine IPC class definitions for class 1, 2, & 3 electronics
MyKay Tronics Manufacturing / Production Technology, Hardware & Services
One of the most critical aspects of electronic assembly reliability is cleanliness. Contaminants left on a circuit board after the reflow process can lead to failures through mechanisms such as electrochemical migration or corrosion.

Read more...

---

Large platform stencil printer
Techmet Manufacturing / Production Technology, Hardware & Services
GKG’s large platform stencil printer, the P-Primo, is designed to meet customer’s ultra-large printing requirements by supporting board dimensions up to 850 x 610 mm.

Read more...

---

Press-fit component inspection
MyKay Tronics Manufacturing / Production Technology, Hardware & Services
In electronics manufacturing, optical inspection of press-fit components is crucial to ensure the quality, reliability, and performance of the final assembled product.

Read more...

---

A new era in wire bond inspection
Techmet Editor's Choice Manufacturing / Production Technology, Hardware & Services
Viscom is developing a 3D wire bond inspection system that incorporates substantially improved sensors, a high image resolution, and fast image data processing.

Read more...

---

High-speed, high-resolution material deposition system
Manufacturing / Production Technology, Hardware & Services
ioTech recently unveiled the io600 inline digital laser material deposition system at productronica 2025.

Read more...

---

Mycronic’s MYPro A40 pick-and-place solution
MyKay Tronics Manufacturing / Production Technology, Hardware & Services
Mycronic’s MYPro A40 pick-and-place solution, equipped with an MX7 high-speed mounthead technology, increases top placement speeds by 48% over the previous generation.

Read more...

---

Why ergonomics matters in digital microscopy
TANDM Manufacturing / Production Technology, Hardware & Services
While magnification technology has kept pace with demand, the wellbeing of the people behind the microscopes has often been overlooked with technicians spending long hours in intense focus, leading to chronic strain, fatigue, and costly mistakes.

Read more...

---

From ER to effortless: The 15-year journey of Seven Labs Technology
Seven Labs Technology Editor's Choice Manufacturing / Production Technology, Hardware & Services
What started as a business likened to an ‘ER’ for electronic components has today grown into a trusted partner delivering kitting services and full turnkey solutions – taking the effort out of electronics and helping customers truly ‘Move to Effortless.’

Read more...

---

Choosing the right electrical component supplier for reliability and scale
Rebound Electronics Manufacturing / Production Technology, Hardware & Services
Selecting the right supplier extends beyond cost or delivery time; it is about ensuring long-term reliability, compliance, and scalability.

Read more...

---