Opto-Electronics


Dot matrix LCD-driver for automotive applications

4 June 2003 Opto-Electronics

EPSON has introduced the S1D15715, a single chip driver for dot matrix liquid crystal displays (LCD) in automotive applications such as low-cost car radios and dashboard systems.

The S1D15715 allows a maximum duty cycle of 1/17 and incorporates a display data memory (RAM) of 102x33 bits. It is suitable for dot-matrix LCDs with a maximum of 102 x 17 pixels.

This new driver features an internal oscillator circuit for display clocks - additional external operation clocks are not required to perform display data read/write operations, thereby ensuring operation at minimum current consumption.

The S1D15715 does not need external smoothing capacitors for the LCD power supply. An internal electronic volume control register allows adjustment of the LCD driver voltages without the need for additional external parts. A command to discharge external capacitors guarantees clear optical turn-off of the display.

Operation is from 1,8 to 5,5 V and it is rated for -40 to +85°C temperature range.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Easy to integrate, quick to react
Opto-Electronics
Würth Elektronik has expanded its range of WL-ICLEDs – RGB-LEDs with integrated controller – to include dual-wire ICLEDs.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Flexible enclosure lighting solutions
IOT Electronics Opto-Electronics
Phoenix Contact’s range of enclosure lights is designed to provide uniform illumination throughout control cabinets, while offering flexible installation and energy-efficient operation.

Read more...
Industry’s smallest laser firing system IC
Opto-Electronics
Silanna Semiconductor recently announced that its FirePower laser firing system ICs for smaller, more efficient LiDAR and rangefinder applications are available in production quantities.

Read more...
More light, greater efficiency, better growth
Würth Elektronik eiSos Opto-Electronics
Würth Elektronik has expanded its WL-SMDC Horticulture product line with new LEDs with wavelengths of 450, 660, and 730 nm in the 3535 package.

Read more...
Intelligent control boosts tunnel safety
IOT Electronics Opto-Electronics
Intelligent tunnel lighting systems are helping operators by delivering adaptive illumination that enhances both safety and energy efficiency.

Read more...
Case Study: Turning data into insight
Hamamatsu Photonics UK Editor's Choice Opto-Electronics
Hamamatsu Photonics’ InGaAs PIN photodiode detector has proven consistent, reliable, and robust for more than a decade, helping Axetris to deliver stable, repeatable measurements.

Read more...
Reliable imaging for industrial applications
Vepac Electronics Opto-Electronics
Combining a high-performance camera with an integrated high-speed processor, these compact systems enable advanced image sensing directly at the device level.

Read more...
Panasonic Industry launches its first flat lens, high-performing PIR sensor
Opto-Electronics
Panasonic Industry has announced the launch of its latest innovation in PIR motion sensors: the Flat Wide Detection Type (12 lens), being the first product incorporating its new PaPIRs+ technology.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved