The Axiomtek SBC83672V4E is an EBGA Embedded SBC (single board computer) with four x LAN for Network Appliance applications. With a low power VIA Eden/C3 processor onboard that supports 400 MHz and 800 MHz (optional 667 MHz and 1 GHz), the wide processor operation for either fan or fan-less use and the entry/higher level system configuration demand are selectable.
The SBC has multiple Fast Ethernet configuration from 2 to 4, which is good for load-balancing and fail-over applications when multiple LANs are a must. Sets of LEDs for programmable indication can be mounted directly onto the appliance enclosure's front bezel for each LAN activity report. Two RS232 COM Ports are reserved to cope with the unique BIOS feature.
The SBC has 64 MB SDRAM on board (for 400 MHz CPU); 128 MB SDRAM onboard and 1 extra 168-pin DIMM max up to 512 MB (for 800 MHz CPU). An onboard CompactFlash socket allows low cost SSD (solid state drive) if needed. Two onboard USBs are available for convenience of system maintenance.
The board has a unique ID that provides better SW security. An optional onboard Mini PCI slot allows more feature expansion such as additional LAN, 1394, DES, etc.
Vertiv expands rack PDU portfolio
Computer/Embedded Technology
Vertiv has announced its new Vertiv PowerIT rack power distribution units designed to address the rising power needs of data-intensive workloads, including AI and high-performance computing.
Read more...Rugged PoE switch built for industrial demands Conical Technologies
Computer/Embedded Technology
The rugged Planet IGS-5225-8P4S-12V comes in a compact, rugged, and highly efficient design, making it the switch of choice for engineers working in harsh environments.
Read more...High-performance networking for demanding environments Electronic Products Design
Computer/Embedded Technology
The Raptor-Epsilon Ethernet switch system is a ruggedised networking solution engineered to deliver advanced switching capabilities, superior reliability, and energy-efficient operation in the most demanding environments.
Read more...Rugged, I/O-rich NVIDIA Jetson solutions Electronic Products Design
Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.
Read more...New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.
Read more...Smallest 13th gen Intel SBC Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...Versatile PoE extender Vepac Electronics
Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...QuecPi smart development board iCorp Technologies
Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version