Power Electronics / Power Management


'Intelligent' power switches for automotive applications

22 October 2003 Power Electronics / Power Management Integrated Solutions

Three new high-side intelligent power switches from International Rectifier feature accurate high frequency current sensing and built-in protection circuits for 14 V automotive applications. The IR3310, IR3311 and IR3312 are designed to enhance reliability and decrease weight in central switching unit light controllers, intelligent glow-plug controls, auxiliary PTC heaters for HVAC systems, engine cooling fan drivers and interior fan controllers. The IR331x family provides accurate current feedback to ±5% at maximum load current over the entire operating temperature range. In PWM controlled applications, the accurate current sensing feature provides the required feedback that enables a microcontroller or ASIC to control the load current. The current feedback bandwidth is 100 kHz, suitable where a low-side switch provides high frequency PWM.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Surveillance & AI roundtable
DeepAlert Lytehouse Refraime SMART Security Solutions Technews Publishing Editor's Choice Surveillance Integrated Solutions AI & Data Analytics
SMART Security Solutions held an online roundtable with a few surveillance experts to explore the intersection of surveillance and AI, gaining insights into the market and how control rooms are evolving.

Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...
90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...
Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...
Compact power MOSFET for high current switching
Future Electronics Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.

Read more...
DC link capacitors for demanding applications
RS South Africa Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.

Read more...
N-channel power MOSFETs
TRX Electronics Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved