|
|
Tube cases
5 November 2003, Manufacturing / Production Technology, Hardware & Services
Fischer Elektronik, a manufacturer of heatsinks, precision headers and 19" modular systems, has extended its case system for Euro cards, by the introduction of a closed version that is protected to the IP54 standard.
An ingenious profiling technique, together with the use of aluminium, achieves high stability and good heat dissipation. A particular feature of the tube case is that the brackets for wall mounting, which are supplied with the case as accessories, can be fastened without any screws.
The case may also be used as bench case.
These cases are available with a natural or black anodised surface. The electrically conductive version is supplied with a transparent or yellow chromated finish or it may be subsequently painted (EMC/ESD). |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Die-cast enclosures in extended lengths
25 September 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
The 1590 die-cast enclosures family from Hammond Manufacturing consists of 41 different sizes in the standard rectangular and Stomp Box, painted variants.
Stomp boxes, colour coded to provide quick ...
- GNSS boards for dead-reckoning
28 August 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
The Locosys RTK-4671-SHDR/MHDR is a high-precision GNSS RTK (global navigation satellite system real-time kinematics) solution targeting the smart driving and lane-level navigation markets.
The newly ...
- Rugged PFC capacitors
28 August 2019, Electrocomp, Passive Components
TDK’s DeltaCap X Black Premium is a new series of Epcos MKD capacitors for power factor correction (PFC). With rated voltages of between 440 V a.c. and 850 V a.c., the capacitors with an internal delta ...
- Hybrid surface mounters
28 August 2019, Zetech, Manufacturing / Production Technology, Hardware & Services
Yamaha’s S10 and S20 i-Pulse 3D hybrid surface mounters, featuring enhanced support for MIDs (moulded interconnect devices), were developed under the concept of a single-unit manufacturing centre designed ...
- Dual-syringe dispenser
28 August 2019, Test & Rework Solutions, Manufacturing / Production Technology, Hardware & Services
Techcon announced the release of its new 50 ml dual-syringe dispenser designed for hassle-free dispensing of 50 ml dual syringes.
The system can accommodate conveniently packaged 50 ml side-by-side ...
- Power inductors for LED headlights
28 August 2019, Electrocomp, Passive Components
TDK has expanded its lineup of metal core power inductors with the new SPM-VT series that is designed especially for the high thermal and current demands of automotive LED headlights. These wire-wound ...
- The only constant is change
31 July 2019, Microtronix Manufacturing, Manufacturing / Production Technology, Hardware & Services
Blatant tender rigging and wholesale corruption poses one of the biggest threats to us achieving arguably the single most important and critical requirement in the revival and rejuvenation of our country’s prospects through job creation.
- All in space is not rocket science
31 July 2019, Elmatica, Manufacturing / Production Technology, Hardware & Services
Elmatica, a Norwegian printed circuit board (PCB) broker that established an office in South Africa last year, has assisted a newcomer to the space satellite scene to put its satellites into space.
- Ferrite magnetic design tool
26 June 2019, Electrocomp, Passive Components
The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
- N-channel enhancement mode FET
26 June 2019, Electrocomp, Power Electronics / Power Management
Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
- Laminates for 5G active antenna arrays
31 July 2019, RF Design, Manufacturing / Production Technology, Hardware & Services
Rogers Corporation has introduced UL 94 V-0 antenna-grade laminates manufactured with standard profile electro-deposited copper foil to meet present and future performance requirements in active antenna ...
- Benchtop soldering robot
31 July 2019, Testerion, Manufacturing / Production Technology, Hardware & Services
Weller’s new WTBR 1000 benchtop robot aims to synergise precision, reliability and productivity of soldering tasks. It is equipped with Weller‘s high-performance ‘Technology Line’ soldering tools, ensuring ...
|
|
