5 November 2003Analogue, Mixed Signal, LSI
Integrated Solutions
The TPA2008D2 is claimed to be the industry's first 5 V filter-free Class-D audio power amplifier with integrated DC volume control. The gain of this Texas Instruments' device, which affects the output power level, is controlled by a DC voltage applied to the volume pin. At full power the TPA2008D2 will drive 6 W (3 W x 2) into 3 Ω speakers with no external heatsink. Eliminating the external heatsink is made possible from its high efficiency of more than 80%. Half power total harmonic distortion plus noise (THD+N) is only 0,045% at 1 kHz and the noise floor is a benchmark for Class-D amplifiers at -80 dBV. The low THD+N and noise floor help ensure a clean, pure signal is heard at the speaker. The TPA2008D2 comes in a standard PowerPAD surface mount 24-pin TSSOP.
Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...Integrated layers offer dependable security OPTEX SMART Security Solutions Technews Publishing
Perimeter Security, Alarms & Intruder Detection Integrated Solutions
A layered approach to security tightens protection and minimises downtime and operational risk. Moreover, integrating all the parts of a solution and proving they can do the job before spending money are critical.
Read more...Digital isolators for I2C interfaces
Analogue, Mixed Signal, LSI
Würth Elektronik has expanded its range of digital isolators with 2-channel bidirectional isolators for I2C communication interfaces.
Read more...Edge AI improves condition monitoring EBV Electrolink
AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.
Read more...Generating negative voltages from a positive supply Altron Arrow
Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.
Read more...Addressing latency and signal integrity challenges Altron Arrow
DSP, Micros & Memory
Strengthening Microchip Technology’s data centre solutions portfolio, its XpressConnect retimers support high-bandwidth architectures, while helping reduce integration complexity.
Read more...Precision timing in compact package Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Designed for use in harsh environments, the EX-423 incorporates a four-point mounted quartz crystal structure that improves shock resistance and reduces g-sensitivity.
Read more...EMC limits and levels Altron Arrow
Editor's Choice Circuit & System Protection
As soon as electronics and electrical systems started interfering with each other, the world had to come to some consensus. Considering physics is universal and does not care about what country electrical/electronic products are used in, it should be the same everywhere, right? It is nearly there, but not quite.
Read more...Industrial time-of-flight proximity sensor EBV Electrolink
Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.
Read more...Introducing STM32CubeMX2 Altron Arrow
Design Automation
STMicroelectronics has launched STM32CubeMX2, a new evolution of its popular configuration and code generation tool for STM32 microcontrollers.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version