Analogue, Mixed Signal, LSI


10/12 bit high-speed ADCs also low powered

25 February 2004 Analogue, Mixed Signal, LSI Transport (Industry)

National Semiconductor has strengthened its portfolio of high-speed analog-to-digital converters (ADCs) by introducing five new 10- and 12-bit converters that it claims feature the industry's lowest power consumption and yet deliver superior dynamic performance. The ADC10080, ADC10065 and ADC10040 devices consume 78 mW at 80 MSPS, 68 mW at 65 MSPS, and 55 mW at 40 MSPS, respectively, making them the lowest power ADCs in the industry, according to the company. They feature a precision 1,2 V internal reference. Differential inputs provide a full-scale selectable input swing of 2 Vpp, 1,5 Vpp or 1 Vpp, allowing flexibility in board design. They also have a wide 400 MHz, -3 dB bandwidth, enabling their use in high-IF applications. These 5 V ADCs consume only 185 mW at 20 MSPS and 160 mW at 10 MSPS.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
Next-gen modules for rugged edge AI systems
Altron Arrow Computer/Embedded Technology
Designed for real-world edge deployments where systems do not sit still, SolidRun’s P100 COMx6 series targets mobile platforms as well as harsh, mission-critical environments.

Read more...
Driving down fleet management costs
Asset Management Transport (Industry) Logistics (Industry)
As we move into the latter part of the first quarter of 2026, businesses operating fleets can expect expenses to increase from the procurement stage through to termination, due to various local and international factors.

Read more...
NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
Exploring Bluetooth Channel Sounding
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.

Read more...
Dual-band Wi-Fi 6 companion module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
High-performance linear regulator
Altron Arrow Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.

Read more...
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved