C-MAC MicroTechnology, has extended its range of frequency control products with the CFPT-125 series, a range of 7 x 5 x 2 mm SMD temperature-compensated voltage-controlled crystal oscillators (TCVCXO). The CFPT-125 series features a standard frequency stability of ±0,9 ppm over the temperature range of -20 to +70°C.
The CFPT-125 can be supplied on standard tape and reel for SMT manufacture. It is designed to withstand a peak reflow soldering temperature of 260°C for 10 seconds, making it compatible with lead-free soldering processes. The crystal resonator used within the TCVCXO is packaged in a separate, hermetically sealed, container, which the company says virtually eliminates contamination keeping ageing effects to a minimum.
This customer-driven design provides HCMOS output, operates from a 3,3 V supply and draws typically 3 mA. The oscillator frequency is adjustable by means of an external control voltage enabling the frequency to be calibrated to nominal after assembly. Standard frequencies 10, 12,8, 13,0, 14,4, 16,32, 16,384, 19,44, 20,0, 26,0, 32,768, 40,0 (MHz) are available from stock with additional frequencies being developed making them well suited for fast prototyping - leading to potential savings in both design time and cost.
This precision clock source is suitable for a variety of next-generation communication and industrial applications including broadband wireless devices (eg, Bluetooth), test and measurement equipment.
For more information contact Kevin Murphy, Arrow Altech Distribution, 011 923 9600, [email protected]
Wi-Fi 6 and Bluetooth LE co-processor Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.
Read more...High-temperature closed-loop MEMS?accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...1-Wire EEPROM with secure authenticator Altron Arrow
DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.
Read more...The 6 GHz band radio solution Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.
Read more...New clock generator family Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...Ultra-low-power wireless module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.
Read more...16-channel multicell battery monitor Altron Arrow
Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version