Microchip's PS700 battery monitor provides precise predictions of battery capacity and condition resulting in longer run time and improved system-power management. The device predicts runtime, charge time and battery state of health while accurately monitoring and reporting current operational conditions and battery status.
The battery monitor integrates a precision, programmable, ADC that can be configured to measure voltage, current and temperature with resolutions of 9-16 bits. The device eliminates the need for external components by incorporating a temperature sensor and regulator. Battery information is provided to the host over an industry-standard SMBus interface while battery and user data is stored within the onboard 4 Kbit EEPROM. The PS700 can use an onboard or external temperature sensor to determine battery temperature.
The PS700 operates in four power modes, consuming less than 80 µA in run mode and less than 1 µA in sleep mode. The device supports 1- and 2-cell lithium batteries and 3-to-6-cell nickel metal hydride battery packs.
Microchip offers an evaluation kit PS7070EV, which includes a PS7070 evaluation board, PS700 IC, PS070 PowerMate device programmer and PS051 PowerInfo2 interface board, USB cable and documentation. The PS700 is available in 8-pin TSSOP.
For more information contact Avnet Kopp, 011 809 6100, Memec SA, 011 897 8600 or Tempe Technologies, 011 452 0530.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...Smart power protection, simplified TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version