25 October 2000Manufacturing / Production Technology, Hardware & Services
Erni says its fully-insulated terminal housings meet requirements falling between single card enclosures and 19" racks. Suitable for housing microcomputer systems, electronic controls, fault signalling systems, decentralised control modules, data transmission systems and the like, they meet machine construction and automotive industry regulations with safe-touch terminals, are easy to assemble and dismantle and can be furnished with ventilation holes in the polycarbonate base.
The smaller range of LDG-A housings provide a facility for insertion of two longitudinally aligned boards and on board as cross connection and as location for control and display elements. The housing bases can be screwed onto mounting panels and have a snap-on fixing to standard DIN 46277 rails and DIN EN 50022 rack assemblies. They afford IP40/IP20 protection without/with mounted terminals and can be used over an ambient temperature range of -40 to +110°C. Units have a standard height of 110 mm, length of 75 mm and come in widths of 22,5, 45, 55, 99,7, 150 and 225 mm respectively, with 12, 14, 16, 30, 46 and 70 terminals.
LDG-A expansion elements include an aluminium covering for the housing base that serves as a mounting and guide element for PC boards and output plugs; frame insert; plug insert with integrated 17-pole multipoint connector; and blanking insert for complete covering of the base housing. Depending on assembly, the frame insert offers a maximum mounting area for components or additional fitting of a transverse board.
The larger LDG-D Series of housings are available in three sizes with 6, 10 and 20 terminals with standard length of 70 mm, width of 25, 50 and 100 mm and heights of 130/110 mm. Almost all direct and indirect connectors such as DIN 41612, 41613, 41617 or 41651 can be fitted, as well as other families, using mounting bars or suitably preassembled units.
A further series of compact LDG-M4 housing constructed to DIN EN 50041 provide insulated cuboid enclosures for proximity switches and momentary-contact limit switches. They can be screwed down or fitted with an adapter for rail mounting. Overall dimensions are 94 x 42 x 42,5 mm.
Weller limited Black Edition soldering station Testerion
Manufacturing / Production Technology, Hardware & Services
Weller’s WE1010 Black Edition Soldering Station is a premium limited-edition soldering station.
Read more...Quick and easy shielding Würth Electronics South Africa
Electronics Technology Manufacturing / Production Technology, Hardware & Services
Würth Elektronik expands its EMC product portfolio with nanocrystalline WE-FNCS sheets.
Read more...Smarter local buying could reboot South Africa’s manufacturing sector
Manufacturing / Production Technology, Hardware & Services
With smarter localisation, clearer procurement rules and a more deliberate industrial strategy, public spending could again become a powerful engine for rebuilding factories, expanding supply chains and restoring confidence in South Africa as a place that makes things.
Read more...The effect of seasonal changes on ESD performance in South Africa Actum
Editor's Choice Circuit & System Protection Manufacturing / Production Technology, Hardware & Services
Electrostatic discharge performance is influenced by several environmental factors, with relative humidity being one of the most important. This is particularly relevant in South Africa, where seasonal changes can result in significant differences in humidity levels.
Read more...High precision in-line conformal coating inspection system MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
Conformal coating is widely used to protect electronics from moisture or other environmental hazards. It is critical to know if coatings are properly applied; covering what is meant to be covered and not covering what should be exposed.
Read more...Soldering day highlights
Manufacturing / Production Technology, Hardware & Services
JAPAN UNIX has published a new event report and highlight video from their UNIX SOLDERING DAY 2026 in Hungary. This event reflects on their commitment to supporting manufacturers not only through soldering automation systems, but also through technical education, live demonstrations, hands-on training, and practical engineering know-how.
Read more...Clearing the Static: Electrostatic Discharge Actum
Manufacturing / Production Technology, Hardware & Services
A cordless ESD (Electrostatic Discharge) wrist strap does not work by grounding the person in the same way as a traditional wired wrist strap. Instead, it works by reducing or balancing the static charge on your body so that you are less likely to discharge electricity into sensitive electronic components.
Read more...Engineering trust in South Africa’s SMT sector ZETECH ONE
Manufacturing / Production Technology, Hardware & Services
From a small Johannesburg start-up to a trusted SMT technology partner, Zetech One has spent four decades helping South African electronics manufacturers improve production quality, efficiency and reliability.
Read more...The new reality of PCB material supply Jemstech
Editor's Choice Manufacturing / Production Technology, Hardware & Services
How resilient manufacturing strategies are helping OEMs navigate a changing global supply chain.
Read more...Streamlining Device Programming with the AutoBee-D1 Vepac Electronics
Manufacturing / Production Technology, Hardware & Services
The AutoBee-D1 desktop automated programmer is designed to simplify the programming of devices, while delivering consistent accuracy, high throughput and reduced manual intervention.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version