Power Electronics / Power Management


Hot-swap controller with current limiting and soft start

19 May 2004 Power Electronics / Power Management Residential Estate (Industry) Products & Solutions

Analog Devices' ADM1073 is a -48 V hot swap controller designed for central office applications. The device uses a number of techniques to protect the external N-channel FET and the supply against inrush currents during board insertion and short circuits in the event of board failure.

Soft start, with adjustable current limit profile, controls the current during FET turn-on, and a programmable current limit determines the maximum current. An adjustable PWM retry scheme limits the FET on-time in the event that the output voltage does not reach the required value in a single on cycle, and the device will shut down the FET after seven consecutive retries. Further safe operating area (SOA) protection is provided by reducing the FET on-time as the voltage drop across the FET increases.

Key features are: precision linear inrush current limiting soft start inrush current limit profiling; precision current limit ON time protects FET; adjustable current limit threshold; adjustable PWM retry scheme and multiple device cascading for charging large capacitive loads; outputs indicate whether load capacitor fully charged and whether supply in or out of limit; shutdown after seven consecutive auto-restarts for FET protection; restart input for user-triggered 5 second shutdown and auto-restart; shunt regulator for operation over wide supply range; supply undervoltage and overvoltage monitoring with adjustable hysteresis is user-programmable.

A 'micro' evaluation board is available.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SanDisk MAX ENDURANCE microSD card
Technews Publishing SMART Security Solutions Smart Home Automation Products & Solutions
SMART Security Solutions received a 128 GB SanDisk microSD card for the video surveillance market to put to the test. The storage card is designed for edge-recording cameras, dashcams, and more.

Read more...
Lightweight body-worn camera
Axis Communications SA Surveillance Products & Solutions
Axis releases new lightweight body-worn camera designed to perform throughout the day. Built on open standards, it integrates seamlessly with AXIS Camera Station and third-party on-premises or cloud-based VMS solutions.

Read more...
High-precision current transducer
Power Electronics / Power Management
Danisense announces its new high-precision DP12IP current transducer designed for isolated DC and AC current measurement in demanding PCB-mounted power electronics applications.

Read more...
Secure holder for protected 18650 batteries
Power Electronics / Power Management
Designed for protected 18650 batteries up to 70 mm long, the holder offers secure retention for portable, industrial, and embedded applications.

Read more...
More room to scale
Altron Arrow Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.

Read more...
Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...
1200 V QSiC modules
Power Electronics / Power Management
SemiQ Inc has launched the QSiC Dual3, a family of 1200 V half-bridge MOSFET modules for motor drives in data centre cooling systems, grid converters in energy storage systems, and industrial drivers.

Read more...
MCOTS transient filter for military applications
RFiber Solutions Power Electronics / Power Management
SynQor has announced the new MCOTS-F-28-T-HE transient half-brick filter, the latest addition to its MCOTS product family.

Read more...
Expanded range of high-thermal-performance QSiC modules
Power Electronics / Power Management
SemiQ’s half-bridge series for data centre power converters and industrial motor drives features low RDSON SiC MOSFETs and parallel SBD diodes for best-in-class power density and conversion efficiency.

Read more...
Transporting lithium batteries and IoT devices
Power Electronics / Power Management
With billions of rechargeable and non-rechargeable lithium cells and batteries powering most of the world’s consumer and industrial electronic devices, shipping them to customers through vast global logistics chains is often an overlooked topic.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved