Power Electronics / Power Management


AC-DC power converters

2 June 2004 Power Electronics / Power Management Perimeter Security, Alarms & Intruder Detection

The Convert Select front end line from Power One is a family of DIN-rail mountable AC-DC converters with power factor correction. The converters are suited for use in demanding applications such as power building controls, factory automation, industrial controls, PLCs, instrumentation, electromagnetic drives, fans and other DC loads. The units are available with single or independently regulated, electrically isolated double outputs for 24 or 48 V loads.

Key features include: power factor correction with low harmonic distortion, negligibly low inrush current, high immunity to transients and surges and low electromagnetic emissions. Internal protection circuits such as input over- and undervoltage lock-out, thermal protection, as well as output overvoltage protection by a second control loop ensure safe operation of the final system.

The outputs deliver an electrically isolated safety extra low voltage (SELV) with low output noise. The Convert Select line is also no load, overload and short-circuit proof. The electronically-controlled short-term peak power capability of up to 150% of the rated output power enables the front end units to deliver additional power to start-up motors or to safely operate subsequent circuit breakers. Built-in large-sized output capacitors absorb possible reverse energy which may be caused by quick decelerations of electromagnetic drives.

The Convert Select line is built according to international safety standards. The thermal concept allows operation at full load up to an ambient temperature of 60°C in free air without forced cooling. A unique feature is the extremely small and compact design of the metallic case. The units are fitted with front accessible cage clamp terminals.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...
Aluminium case upgrade boosts performance
Vepac Electronics Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.

Read more...
Extending the range of power converters
RS South Africa Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.

Read more...
Power-dense modules operate up to 115 V DC
Brabek Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.

Read more...
Finding value for money with your IoT battery
Uniross Batteries Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.

Read more...
Powering the IoT
Uniross Batteries Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.

Read more...
The move to DC infrastructure
IOT Electronics Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.

Read more...
Power inductor for automotive applications
Würth Elektronik eiSos Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.

Read more...
High-performance DC-DC converter
Conical Technologies Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.

Read more...
DC-DC converters for next-generation IoT
iCorp Technologies Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved