Test & Measurement


44-pin test plug for standard PLCC sockets

11 August 2004 Test & Measurement Asset Management

Aries Electronics' 44-pin test plug for use with standard PLCC sockets can either have the cable soldered directly to the plug, or on the socket or on the header on the topside of the plug. This gives users three choices of connections for maximum flexibility.

The rugged test plug can withstand multiple insertions and extractions according to the maker, and it can also be used to debug and test circuit board prototypes as well as interface additional circuitry to an existing design.

The 44-301695-XX test plug's body is constructed of a 1,58 mm thick, FR-4 material with 28 g of copper traces, and is UL94V-0 rated. Male pins are brass alloy 360 with 5,08 µm tin over 2,54 µm in nickel per QQ-N-290. The socket version pins are phosphor bronze alloy per QQ-B-750.

This test plug is part of Aries' Correct-A-Chip 'intelligent connectors' that can modify existing designs without changing existing PCB layouts. These adapters can also incorporate both passive and active components. The test plug is available in custom materials, platings, sizes and configurations to suit specific customer requirements.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...
Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...
Smart digital fibre sensor
Avnet Abacus Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.

Read more...
Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...
Verification is reshaping South Africa’s labour market
Security Services & Risk Management Asset Management Commercial (Industry)
Hiring faster, trusting less: in a labour market defined by both constraint and potential, the ability to hire with confidence may well become one of the most important competitive advantages.

Read more...
B&K Precision’s Series 1820B frequency counter
Comtest Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.

Read more...
How transition-edge sensors detect microwave radiation
Test & Measurement
The elegant interplay of superconductivity, thermal physics, and precision electronics makes TES technology a cornerstone of modern low-energy photon detection.

Read more...
Compact high precision magnetometer
Future Electronics Test & Measurement
Bosch Sensortec has introduced the BMM350, a compact 16-bit, 3-axis magnetometer engineered to deliver high accuracy, low noise, and exceptional energy efficiency in space constrained designs.

Read more...
Ultra compact NTC thermistors
RS South Africa Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.

Read more...
Omniflex uses LoRaWAN to track water usage
Omniflex Remote Monitoring Specialists Test & Measurement
Omniflex has helped New South Wales Ports improve its ability to track water usage by installing remote monitoring to 38 water meters at its Port Kembla site, sending the data to the NSWPorts web portal.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved