Dallas Semiconductor produces what it says is the industry's first digital temperature-sensor IC to operate from a low supply-voltage range of 1,7 V to 3,5 V, making it ideal for low-power and battery-operated systems, plus any thermally sensitive system that uses low supply-voltage rails.
The DS620 is factory calibrated to an accuracy of ±0,5°C (max) over its entire supply-voltage range and its wide temperature range of 0 to +70°C. It is ±2,0°C (max) accurate over its entire operating temperature range of -55 to +125°C. The DS620 thermometer provides 10-, 11-, 12-, or 13-bit digital temperature readings that translate to resolutions between 0,5°C (10-bit) and 0,0625°C (13-bit). Thermostat functionality with nonvolatile (EEPROM), user-defined trip points, allows the user to customise the threshold temperature and output hysteresis. The DS620 can be configured to measure temperature at power up, thus enabling its thermostat functionality to operate in a standalone mode without user or processor intervention. When not in use, the thermostat output can act as a general-purpose programmable output. Communication with the DS620 is achieved through a standard 2-wire serial interface.
Typical applications for the DS620 (offered in 8-pin microSOP package) include portable temperature loggers, portable medical equipment, networking equipment, servers/computers, test equipment, and any low-voltage, thermally sensitive system.
New 3dB hybrid couplers Electrocomp
Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Robust series of vertical-mating battery connectors Electrocomp
Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Low-profile tantalum chip capacitors Electrocomp
Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
Read more...Compact high-performance antennas Electrocomp
Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.
Read more...Robust PoE module CST Electronics
Power Electronics / Power Management
The Ag59800-LPB high power, IEEE 802.3bt compliant, PD module from Silvertel offers typical efficiency of 95% making it an ideal choice for higher power, space-constrained applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version