Frequency control products specialist Euroquartz has launched a new range of ultra-miniature surface mount crystals designed for use in a wide range of handheld communications applications. The MJ series crystals are housed in an ultra-miniature 5 x 3,2 mm footprint package with low profile of just 1 mm. This makes the crystals highly suited for use in state-of-the-art handheld and portable communications equipment.
Offered in frequencies from 16 to 90 MHz, the MJ series also deliver superior shock and vibration performance. Frequencies from 12 MHz to 40 MHz are available in AT-Cut fundamental mode with maximum ESR of 50 Ω. From 40 to 90 MHz the crystals are available in AT-Cut, third overtone mode with maximum ESR of 60 Ω.
Frequency tolerance (at 25°C) of ±5, ±10, ±20 and ±30 ppm are available with a choice of temperature stability of ±5 ppm to ±50 ppm over -20 to +70°C and ±3 ppm over -30 to +85°C. Typical shunt capacitance is from 2 to 4 pF (5 pF maximum), load capacitance is customer-specifiable and ranges from 10 pF to 32 pF. Recommended drive level is 10 μW and an ageing of less than ±3 ppm per year can be expected.
For more information contact Kevin Murphy, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]
Accelerate development of physical AI deployments Altron Arrow
DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N-
AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.
Read more...Universal NFC device Altron Arrow
DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.
Read more...Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...SoC brings scalable edge AI to life Altron Arrow
AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.
Read more...Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...Generating negative voltages from a positive supply Altron Arrow
Editor's Choice Passive Components
It is common for IoT devices, industrial sensors, meters, and medical equipment to require both a positive and negative voltage, and this article explains the options available to produce a negative rail from a positive rail supply.
Read more...Addressing latency and signal integrity challenges Altron Arrow
DSP, Micros & Memory
Strengthening Microchip Technology’s data centre solutions portfolio, its XpressConnect retimers support high-bandwidth architectures, while helping reduce integration complexity.
Read more...Precision timing in compact package Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Designed for use in harsh environments, the EX-423 incorporates a four-point mounted quartz crystal structure that improves shock resistance and reduces g-sensitivity.
Read more...What happens when trust can no longer live only in software?
Computer/Embedded Technology Electronics Technology
[Sponsored] For years, many enterprise security architectures treated hardware primarily as the execution layer, while software handled authentication, access control and trust decisions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version