Waterproof patchcords for industrial Ethernet
3 November 2004
Interconnection
Bulgin's Buccaneer range of waterproof Ethernet connectors is an 'overmoulded' version of the pre-wired patchcords, providing environmental sealing to IP68. Combining industry standard RJ45 connectors with the Buccaneer characteristics, this connector system provides a secure, reliable and practical solution to harsh industrial environments, says Bulgin.
The body of the new 'overmoulded' patchcords is moulded directly over the pre-wired connector onto the cable. This can offer distinct advantages; the body forms a seal around the cable so no separate cable gland is needed, the cable is secured so no retaining cage is required and, as the termination is sealed, the connector is completely tamper-proof.
A polyurethane (PUR) cable jacket has been chosen for the cable. This presents very good mechanical properties, has good chemical and water resistance with low smoke, low halogen flame retardant construction, making it particularly suitable for internal industrial environments. The body material is UL94V-0 rated.
These patchcords are available in single and double ended versions. The PX0836 has a sealed RJ45 plug to bare ends, the PX0837 has a sealed RJ45 plug to shielded RJ45 plug and the PX0838 a sealed RJ45 plug to sealed RJ45 plug. Each patchcord is available in 2, 3 or 5 m as standard lengths with other lengths available on request.
Shielded RJ45 plugs are used throughout, which, combined with the S-FTP cable construction and shielded panel mount couplers, provide a system performance to Cat5e levels.
Further reading:
Blade terminals deliver greater power density
Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...
What’s the big deal with open pin fields?
Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus
Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.
Read more...
New connector for Push-X technology
Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm
2.
Read more...
Test cable designed for maximum ruggedness
Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...
Safe connection under load
Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...
Connectors for energy storage systems
Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
mBend cable assemblies
Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
Read more...
printer friendly version