Opto-Electronics


RGB surface-mounted LED is extremely thin

9 March 2005 Opto-Electronics

BivarOpto's ultra-thin (0,6 mm) surface mount RGB (red, green, blue) device features individual addressable die for exact colour mixing and matching. This creates a new solution for diverse, space-conscious applications, including backlit keypads and LCDs used in handheld and mobile appliance applications.

Provided in an industry-standard 0606 SMT device package, this unit is well-suited for battery operated devices due to its low power consumption and form factor, enabling use of a single or multiple, full spectrum colour chip. The SMTC0606 is also manufactured in compliance with WEEE and RoHS PB Free materials and processes.

The SMTC0606 features an internal-tri-chip circuit design, with three individually-addressable LED dies. Lens appearance when off is water clear. The tri-chip RGB design is comprised of a single AlGainP and two InGaN/SIC chip dies, featuring peak wavelengths of 635, 520 and 465 (nm) respectively. The result is a brilliant, full colour display that can be programmed to meet specific display needs. Absolute maximum rating of forward current drive is 125 mA (Peak If).

The RGB LED chip measures 1,5 x 1,6 mm and is 0,6 mm in height. Units are encapsulated in a special epoxy blend to assure proper withstanding of temperature, operation and assembly processes. It can also be used with BivarOpto Flexible Light Pipes (FLP).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

DC PSU: The cornerstone for efficient solar-storage systems
Vepac Electronics Power Electronics / Power Management
PV energy storage systems are evolving and DC power supplies, with their technical characteristics that are naturally compatible with new energy, have become a key carrier for improving system energy efficiency.

Read more...
Africa’s future internet could be on overland submarine cables
Opto-Electronics
SEACOM aims to explore an innovative new concept: utilising submarine cable technology to address the longstanding challenges in Africa’s terrestrial infrastructure.

Read more...
Cabinets for industrial applications
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Verotec’s VERAK cabinets addresses the most stringent enclosure requirements providing both IP65 environmental protection and EMC screening.

Read more...
Versatile range of camera modules
EBV Electrolink Opto-Electronics
The CAM-66GY pro-modules from ST are a full range of sample camera modules made for a seamless evaluation and integration of the VD66GY 1,5-megapixel colour image sensor.

Read more...
SIGLENT launches new 8 GHz DSO
Vepac Electronics Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.

Read more...
Mission-critical RF transceiver
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
Ultra-portable spectrum analyser
Vepac Electronics Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.

Read more...
Versatile 3-in-1 instrument
Vepac Electronics Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved