Smaller miniature sealed connector system
9 March 2005
Interconnection
Joining Bulgin's renowned family of 'Buccaneer' sealed plastic connectors, the new 400 Series is the smallest in the range with an overall diameter of just over 19 mm, and, like others in the family, offers true waterproof sealing to IP68.
Although small in size the 400 series is packed with specification: multiple pole connections, from two up to 12 way, have been chosen to offer the maximum number of configurations; the 2 and 3 pole are rated at 8 A, 250 V, the 4, 6 and 8 pole 5 A, 125 V and the 10 and 12 pole at 1 A, 50 V. Using high quality gold-plated crimp and solder contact pins, contact resistance is less than 5 mΩ and therefore suitable for signal and power applications. Even within such a small connector, contact engagement is over 2,5 mm to maintain electrical integrity and enhance the long term reliability of the connector.
The secure cable sealing system uses the tried and tested method offered by compressive collet, cable gland and retaining nut. Separate colour-coded cable glands are used to provide sealing on cable diameters ranging from 3,5 to 7 mm, giving strong cable retention at over 80 Newtons.
Moulded in flame retardant V-0 rated Nylon, the three body styles - flex, flex in-line and panel mounting - are each available with plug or socket contacts. This allows cable to cable and cable to panel connection in either configuration. The connector faces are 'scoop proof' so mis-mating will not damage the contacts.
Designed to meet UL, CSA and VDE electrical approvals the 400 Series Buccaneer provides a lower cost alternative to comparable Mil spec connectors.
Further reading:
Designing with PCIe
Spectrum Concepts
Editor's Choice Interconnection
PCI Express has become the backbone of modern high-performance systems with each new generation promising higher bandwidth, but that performance comes with a cost.
Read more...
Connectivity solutions for hydrogen technologies
Hiconnex
Interconnection
As the production distribution and utilisation of hydrogen continue to scale, connectivity becomes a key enabler for efficient energy transmission, data communication, and system control.
Read more...
Robust single-pole power connectivity
Hiconnex
Interconnection
Designed for cable-to-cable and cable-to-equipment use, Radiall’s single-pole power connector support current ratings from 250 A to 750 A and operating voltages up to 1000 V AC or DC.
Read more...
M12 push-pull connectors
IOT Electronics
Interconnection
Phoenix Contact’s M12 push-pull connectors with internal locking set a new benchmark for fast, secure, and space-saving connectivity in industrial automation.
Read more...
Versatile outdoor waterproof connectors
Vepac Electronics
Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.
Read more...
Comprehensive range of data connectors
IOT Electronics
Interconnection
Phoenix Contact’s comprehensive range of data connectors provides reliable connection solutions for modern networked applications across industrial, infrastructure, and commercial environments.
Read more...
Compact inline connector for aerospace
Hiconnex
Interconnection
Radiall’s Small Inline Connector series is a fully qualified wire-to-wire solution designed to simplify harness creation, installation, and modification in aerospace applications.
Read more...
Compact hybrid power storage connector
IOT Electronics
Interconnection
Phoenix Contact has introduced a new hybrid connector for electrical energy storage systems, designed to combine power, signal, and data transmission in a single, compact interface.
Read more...
MIL-spec connector series
Future Electronics
Interconnection
The MIL-HD2 connector series from Amphenol is the company’s next-generation, SOSA-aligned solution engineered to meet the most demanding requirements of modern military embedded systems.
Read more...
DC connectors approved for 2000 V
IOT Electronics
Interconnection
Phoneix Contact’s Sunclix DC connectors are now approved for system voltages of up to 2000 V in accordance with TÜV Rheinland’s new test specification, opening the door to higher-voltage PV designs and reduced system costs.
Read more...
printer friendly version