Interconnection


IP67-compliant DeviceNet plug connectors

9 March 2005 Interconnection

Contact inserts are now available for Variosub-DeviceNet plug connectors from Phoenix Contact that can be directly soldered on the PCB. These can also be used for making cable-to-cable connections in the field. Hence, one can now directly integrate plug connectors into one's devices.

The fieldbus plug connectors with push-pull locking offer reliable IP67 protection in industrial applications. Integrated EMC contacting insulates against electromagnetic fields and enables disturbance-free data transmission. Two integrated cable glands make it easy to implement line structures using incoming and outgoing lines in thick and thin formats. The couplings can be used for cable-to-cable ('flying') connections or directly mounted to a housing wall, thus making T or X cable branches possible.

A special Combicon contact insert with 30 micro-inch thick gold coating - in accordance with ODVA fieldbus organisation guidelines - ensures faultless functioning and compatibility throughout the system.

For more information contact Electrocomp, +27 (0)11 458 9000 or Sean Hadley, Phoenix Contact, +27 (0)11 793 7121, seanh@phoenixcontact.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact X2 capacitors for noise suppression
25 August 2021, Electrocomp , Circuit & System Protection
A new series of very compact EPCOS X2 capacitors for noise suppression, rated for 275 V a.c. and covering a capacitance range from 33 nF to 1 µF, has been released by TDK. Depending on the capacitance ...

Read more...
Common-mode filters for mobile devices
29 September 2021, Electrocomp , Circuit & System Protection
TDK has developed the TCM0403M Series of miniaturised thin-film common-mode filters for mobile devices. The 0403 case size (0,457 x 0,3 x 0,23 mm) is 58% smaller and 56% lighter than previous products. ...

Read more...
Micro connectors with backshells
25 August 2021, Hiconnex , Interconnection
At this year’s DSEI exhibition, Nicomatic launched its new DBMM Series, a modification of the DMM 2 mm connectors to include fully integrated backshells. DBMM connectors save space, measuring only 15 mm ...

Read more...
Terminal blocks for measuring transducers
25 August 2021, Phoenix Contact , Interconnection
The PTVME test-disconnect terminal blocks from Phoenix Contact are an extension to the PTV portfolio and can be used in all applications on the secondary wiring side of switching devices for transducers ...

Read more...
Meeting the demands placed on connectors in automotive electronics
29 September 2021, TRX Electronics , Interconnection
A few decades ago, cars were purely mechanical machines, sophisticated in terms of their moving parts but simple in their electronics. This is no longer true.

Read more...
Small rectangular plastic enclosures
29 September 2021, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Owing to its versatility, Hammond Manufacturing’s 1591 family is the company’s best-selling plastic enclosure range, with a wide choice of sizes and features. The 1591 family is available in five small ...

Read more...
Outdoor housings for space-critical applications
29 September 2021, Phoenix Contact , Enclosures, Racks, Cabinets & Panel Products
New outdoor housings with an installation depth of 80 mm extend the ECS range of outdoor housings from Phoenix Contact. The smaller design allows device dimensions that are 75% more compact. It is therefore ...

Read more...
Millimetre-wave interconnect considerations
29 September 2021, RF Design , Interconnection
There has been a general trend of radio and sensing applications shifting to higher frequencies, either to avoid interference due to the growing use of RF and microwave spectrum or to take advantage of ...

Read more...
Charging sockets with LED indicators and temperature measurement
29 September 2021, Phoenix Contact , Interconnection
The new generation of type-2 Charx connect charging sockets from Phoenix Contact offers AC home charger and charging station manufacturers and users simplified installation and maintenance, enhanced safety ...

Read more...
Shielded power inductors
29 September 2021, Electrocomp , Passive Components
Bourns’ new Model SRP6530A shielded power inductor series is designed to meet the high current density and high temperature requirements of a variety of applications. These AEC-Q200 compliant inductors ...

Read more...