mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Surface mount high inductance RF chokes
9 March 2005, Passive Components

Gowanda Electronics offers a series of RF surface mount inductors designed for use in the lighting industry and other applications where high voltage handling capability is required. In an industry where leaded chokes are typical, the introduction of the HL 8527 responds to market interest for surface mount options. The HL 8527 Series is specifically targeted for use in starter circuits and electronic ballasts within the lighting industry. The design of these chokes enables them to handle the high voltage spikes associated with these applications.

These chokes can also be used in any RF application where high inductance is required. Applications include RF signal circuitry in communications equipment, medical diagnostic equipment and industrial process control equipment. The HL 8527 chokes can also be used in security systems, instrumentation, bar code and laboratory analysis equipment, aviation equipment, navigation equipment, telecommunications and cable TV.

Technical specifications for products in Gowanda's HL 8527 series include: inductance (±10%) from 16 000 to 55 000 μH (at 79 kHz) and current ratings from 67 to 50 mA d.c. Gowanda Electronics also offers custom designs in the HL 8527 series in order to meet the specific requirements of an application.


  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Ferrite magnetic design tool
    26 June 2019, Electrocomp, Passive Components
    The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
  • Shielded power inductors
    31 July 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...
  • Shielded power inductors
    26 June 2019, RF Design, Passive Components
    High-temperature power inductors from Coilcraft are available with inductance values from 22 to 47 µH, current ratings up to 5,5 A, and low direct current resistance (DCR). The inductors in the XAL7050 ...
  • Automotive qualified chip resistors
    29 May 2019, Electrocomp, Passive Components
    Bourns announced the introduction of its new sulphur-resistant, AEC-Q200 compliant thick film chip resistor series. The new Model CRxxxxA-AS series is available in eight different footprints from small ...
  • Inductor learning kit
    30 April 2019, Würth Elektronik eiSos, Passive Components
    Co-developed by Würth Elektronik eiSos and Texas Instruments, the TI-PMLK Buck Würth Elektronik Edition is a learning kit to autonomously study the impact of magnetics in a power supply using a buck board ...
  • Rugged AC filter capacitors
    30 April 2019, Electrocomp, Passive Components
    TDK has introduced a new series of AC filter capacitors that are UL 810 approved at the component level and carry the CE mark. The capacitors of the B32354S3* series are designed for a rated voltage of ...
  • High-voltage double chokes
    27 March 2019, Würth Elektronik eiSos, Passive Components
    With its WE-TDC HV, Würth Elektronik eiSos has introduced a further double choke optimised for SMT assembly. The magnetically shielded 1:1 transformer, with an isolation voltage of 2 000 V, boasts very ...
  • Moulded power inductors
    27 March 2019, RF Design, Passive Components
    Coilcraft introduced its new XGL4020 series of high-performance moulded power inductors at this year’s Applied Power Electronics Conference (APEC) in California, USA. They feature very low DC and AC losses ...
  • RM6 and RM10 transformers
    27 March 2019, Würth Elektronik eiSos, Passive Components
    The new MID-OLRM extended rail RM6 and RM10 transformer series for offline applications is now available from Würth Elektronik. For the past 30 years, the RM packages have required flying leads to meet ...
  • G.fast transformers
    27 March 2019, Würth Elektronik eiSos, Passive Components
    Würth Elektronik announced the release of additional G.fast transformers to the MID-DSLSCK family approved for use with Sckipio chipsets. These transformers cover both the 106 MHz and 212 MHz G.fast profiles ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.