Passive Components


Matched flat chip resistor arrays

23 March 2005 Passive Components

Vishay Intertechnology has introduced two new series of flat chip resistor arrays that integrate four thin film resistors into a single 0612 surface-mount package.

The ACAC 0612 precision series and ACAC 0612 professional series resistor arrays target applications that demand high component densities and accurate and stable resistor performance.

The ACAC 0612 precision series resistor arrays feature absolute TCR of ±25 ppm/°K and tracking TCR of ±15 ppm/°K, and absolute tolerance of ±0,25% and matched tolerance of 0,1%. The professional series features absolute TCR of ±50 ppm/°K and absolute tolerance of ±1%.

The resistor arrays have a footprint of 1,6 x 3,2 mm, a reduction of approximately 40% when compared to the use of four discrete 0603 resistors. Resistance options range from 100 Ω to 221 kΩ, and arrays are available with four equal values, four different values, or two equal value pairs. Maximum power dissipation for the new arrays is 0,3 W, with individual resistors rated at a maximum of 0,1 W.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
Exploring Bluetooth Channel Sounding
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.

Read more...
Dual-band Wi-Fi 6 companion module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
High-performance linear regulator
Altron Arrow Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.

Read more...
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...
Collaboration to explore 10BASE-T1S SPE
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The collaboration between Microchip and Hyundai aims to evaluate and promote the adoption of advanced in-vehicle network technologies leveraging each company’s strengths.

Read more...
High-performance processing for cost-aware industrial IoT
Altron Arrow DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.

Read more...
Compact, durable and wideband wireless performance
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The Taoglas Metal Stamped MPA Series of antennas is engineered to meet the growing demands of modern wireless devices that require high performance in increasingly compact form factors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved