The TPS713xx family of low-dropout (LDO) voltage regulators from Texas Instruments is tailored to noise-sensitive and RF applications. These products feature dual 250 mA LDOs with ultra-low noise, high power-supply rejection ratio (PSRR), and fast transient and start-up response, says TI. These devices also feature an integrated supply voltage supervisor that monitors the voltage at OUT2 and will assert if the voltage falls to 95% of the measured output.
Each regulator output is stable using low-cost type 2,2 μF ceramic output capacitors and features very low dropout voltages (typically 125 mV at 250 mA). The regulators achieve fast start-up times (approximately 60 μs with a 0,001 μF bypass capacitor) while consuming very low quiescent current (300 μA with both outputs enabled). When the device is placed in standby mode, the supply current is reduced to less than 0,3 μA. Each regulator exhibits about 32 μVrms of output voltage noise with a 2,8 V output and a 0,01 μF noise reduction capacitor.
Applications with analog components that are noise-sensitive, such as portable RF electronics, will benefit from its high PSRR, low noise, and fast line and load transient features. The TPS713xx family is offered in a thin 3 x 3 mm SON package and is fully specified from -40 to +125°C.
For more information contact Les Bidgood, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]
Accelerate development of physical AI deployments Altron Arrow
DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N-
AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.
Read more...Setting a new benchmark for high-power DC load testing Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...Universal NFC device Altron Arrow
DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.
Read more...Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...SoC brings scalable edge AI to life Altron Arrow
AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.
Read more...Compact direct Time-of-Flight 3D LiDAR module Altron Arrow
Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.
Read more...Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.
Read more...40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.