Opto-Electronics


CCD cameras and image intensifiers have many applications

6 April 2005 Opto-Electronics

AfriMeasure has introduced a comprehensive range of Lheritier CCD cameras and Photonis iImage intensifiers.

Lheritier's products are used in military, scientific, medical and industrial fields and include fully-gated 24/7 dynamic range cameras from 10(-5) lux, IR cameras, laser-coupled active TV imaging, high speed CMOS cameras, electron microscopy, photon counting and digital opthalmic imaging. Digital signalling processors are also included in its range.

The cameras have applications in security systems, on buildings, trains and vehicles. The underwater cameras can operate under pressures of up to 600 kPa and are used for inspection of off-shore platforms, boreholes and small diameter pipes.

High speed events are detected by its high resolution interline CCD camera which can then be recorded on the LHR 812 high speed video with a frame rate of up to 1600 frames/second.

Photonis is a European leader in the design, development and production of image intensifiers, microchannel plate technology and photomultiplier tubes. Its products are used in many of Lheritier's cameras, and as such, AfriMeasure is in a unique position to offer complete solutions for any CCD camera application.

For more information contact AfriMeasure, +27 (0)11 675 4447, [email protected]





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Enhanced breaker status and communication module
Schneider Electric South Africa Opto-Electronics
Schneider Electric has announced the launch of its new Breaker Status and Communication Module (BSCM) Modbus SL/ULP, which delivers enhanced performance, improved connectivity, and simplified integration for power distribution systems.

Read more...
Heat-resistant LEDs
Opto-Electronics
Würth Elektronik’s new RGB LEDs are characterised by excellent heat resistance with an insensitivity to temperatures from -40 to 100°C making them ideal solutions for reliable, colour-variable lighting in applications at high operating temperatures.

Read more...
PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Mouser now shipping onsemi’s image sensors
TRX Electronics Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved