Circuit & System Protection


Choke series for interference suppression

1 June 2005 Circuit & System Protection

Epcos has added the B82732F and B82733F series to its range of current-compensated chokes. The new series features one of the best inductance/rated current ratios worldwide. High leakage inductance makes the chokes well-suited for interference suppression in switch-mode power supplies, lamp ballasts and a host of applications in industrial electronics.

Due to their coated frame cores and multichamber coil formers, a high natural resonant frequency is obtained. Current-compensated chokes of series B82732F are designed for currents from 0,5 to 1,7 A with inductances from 10 to 100 mH. Inherent resistance ranges from 260 to 2840 mΩ. Series B82733F covers the current range from 0,75 to 2,9 A with inherent resistances from 130 to 1700 mΩ. Inductance ratings are identical with those of series B82732F.

The chokes are designed for an operating voltage of 250 V a.c. The footprint measures 24 x 14 mm with an insertion height of 14 mm.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Electrical fire safety in lithium-ion battery rooms
Circuit & System Protection
Pratliperl is a non-combustible, ultra-lightweight aggregate that can be mixed with cement and applied as a plaster or screed to walls, floors, and ceilings.

Read more...
Clearing the Static: ESD training in the workplace
Actum Circuit & System Protection
To protect sensitive electronic components, A structured, consistent, and sustainable ESD training program is essential.

Read more...
Protect your pumps – protect your profit
NewElec Pretoria Circuit & System Protection
In South Africa’s demanding agricultural landscape, irrigation is not just an essential service – it is the heartbeat of farm productivity.

Read more...
New 3dB hybrid couplers
Electrocomp Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.

Read more...
Robust series of vertical-mating battery connectors
Electrocomp Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.

Read more...
Clearing the Static: ESD and installation: A durable antistatic solution
Actum Circuit & System Protection
ESD flooring provides a reliable, long-term solution for managing static electricity by safely dissipating static charges through the floor to a designated ground point.

Read more...
Why wait to automate
NewElec Pretoria Circuit & System Protection
NewElec’s initiative helps you gain operational visibility via HMI or PLC by retrofitting intelligent motor protection relays without replacing MCCs or rewiring the plant.

Read more...
Clearing the Static: Effectively control static in your workplace
Actum Circuit & System Protection
Controlling electrostatic discharge in the workplace is crucial to protect sensitive electronic equipment from damage. Implementing an ESD control program involves various measures and tests.

Read more...
Low-profile tantalum chip capacitors
Electrocomp Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.

Read more...
Compact high-performance antennas
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved